Installation of the Structural Bracket Assembly

TASK 56-12-11-400-802-C
Installation of the Structural Bracket Assembly

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

B. Referenced Information

REFERENCE	DESIGNATION
TASK 25-13-41-400-803-A	Installation of the Personal Tablet Support
TASK 56-12-11-000-002-A	Removal of the Sliding Window Panel
TASK 56-12-11-000-002-A-01	Removal of the Sliding Window Panel
TASK 56-12-11-400-002-A	Installation of the Sliding Window Panel
TASK 56-12-11-400-002-A-01	Installation of the Sliding Window Panel
Structural Bracket Assembly

3. Job Set-up
Subtask 56-12-11-010-070-A

A. Get Access
(1) Make sure that the sliding window lining is removed (Ref. AMM TASK 56-12-11-000-002).

4. Procedure
Subtask 56-12-11-420-092-A

A. Installation of the Structural Bracket Assembly

Structural Bracket Assembly

(1) Make sure that the parts retained from the removed component are clean and in the correct condition.
(2) If they are not sufficiently clean, clean the parts with Non Aqueous Cleaner-General - - (Material No.08BAA9) and the Textile-Lint free Cotton - (Material No.14SBA1) .
(3) Put and hold the structural bracket assembly (1) in position on the window frame.
(4) Install the washers (3) and the bolts (2).
(5) Install the bushes (4), the washers (5) and the nuts (6).
(6) Tighten the nuts (6).

5. Close-up
Subtask 56-12-11-410-061-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the sliding window lining (Ref. AMM TASK 56-12-11-400-002).
(3) Install the personal tablet support (Ref. AMM TASK 25-13-41-400-803).

[Rev.10 from 2021] 2026.04.01 02:07:34 UTC