DOC AIRBUS | AMM A320FInstallation of the Sliding Window Seal
TASK 56-12-11-400-003-A-01
Installation of the Sliding Window Seal
This alternative procedure is applicable to the glass windows (SGS (formerly SPS) supplier, P/N SPSA320...) which include seal with holes.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 56-12-11-941-071-A
Subtask 56-12-11-914-054-A
Subtask 56-12-11-865-083-A
[Rev.10 from 2021]
2026.04.01 02:07:27 UTC
Installation of the Sliding Window Seal
WARNING:
MAKE SURE THAT THE CIRCUIT BREAKERS RELATED TO THE WEATHER RADAR ARE OPENED, SAFETIED AND TAGGED.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobThis alternative procedure is applicable to the glass windows (SGS (formerly SPS) supplier, P/N SPSA320...) which include seal with holes.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SCOTCHBRITE |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.05JBC9) | Contact Adhesive-Rubber & Plastic Bonding Neoprene base - |
| (Material No.06CMD9) | Silicone Adhesive Sealant-General Purpose One part legacy |
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 211 | COCKPIT |
| 212 | COCKPIT |
| REFERENCE | DESIGNATION |
|---|---|
Sliding Window Seal - Removal/InstallationSubtask 56-12-11-941-071-A
A. Aircraft Maintenance Configuration
(1) Make sure that the access platform is in position.
Subtask 56-12-11-865-082-A (1) Make sure that the access platform is in position.
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 121VU | COM NAV/RADAR/1 | 5SQ1 | K13 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/2 | 5SQ2 | K14 |
| ** ON A/C ALL | |||
| FOR FIN: 8DG1 (WINDOWSLIDING, L) | |||
| 122VU | ANTI ICE/WINDOWS/L | 4DG1 | X14 |
| 122VU | ANTI ICE/WHC/1 | 5DG1 | X13 |
| 123VU | ANTI ICE/L/WHSLD | 1DG1 | AF10 |
| FOR FIN: 8DG2 (WINDOWSLIDING, R) | |||
| 122VU | ANTI ICE/WINDOWS/R | 4DG2 | W14 |
| 122VU | ANTI ICE/WHC/2 | 5DG2 | W13 |
| 123VU | ANTI ICE/R/WHSLD | 1DG2 | AF03 |
Subtask 56-12-11-914-054-A
A. Preparation for Installation
(1) Lightly rub the retainer area (41) which contains the seal (40) with a SCOTCHBRITE.
(2) Clean the surfaces and remove the grease with Non Aqueous Cleaner-General - - (Material No.08BAA9) and Textile-Lint free Cotton - (Material No.14SBA1) .
(3) Fully dry the surface.
(4) Lightly rub the seal surfaces which touch the retainer (41).
(5) For the seal P/N D531112462xx (Black color):
(a) Apply the Contact Adhesive-Rubber & Plastic Bonding Neoprene base - (Material No.05JBC9) on the surfaces of the seal (40).
(b) Let the adhesive compound become almost dry.
(6) For the seal P/N D53111248200 or D531200002xx (Light gray color):
(a) Apply a thin layer of the primer of Silicone Adhesive Sealant-General Purpose One part legacy (Material No.06CMD9) on the retainer (41).
(b) Apply the Silicone Adhesive Sealant-General Purpose One part legacy (Material No.06CMD9) on the surfaces of the seal (40).
Subtask 56-12-11-420-074-A (1) Lightly rub the retainer area (41) which contains the seal (40) with a SCOTCHBRITE.
(2) Clean the surfaces and remove the grease with Non Aqueous Cleaner-General - - (Material No.08BAA9) and Textile-Lint free Cotton - (Material No.14SBA1) .
(3) Fully dry the surface.
(4) Lightly rub the seal surfaces which touch the retainer (41).
(5) For the seal P/N D531112462xx (Black color):
(a) Apply the Contact Adhesive-Rubber & Plastic Bonding Neoprene base - (Material No.05JBC9) on the surfaces of the seal (40).
(b) Let the adhesive compound become almost dry.
(6) For the seal P/N D53111248200 or D531200002xx (Light gray color):
(a) Apply a thin layer of the primer of Silicone Adhesive Sealant-General Purpose One part legacy (Material No.06CMD9) on the retainer (41).
(b) Apply the Silicone Adhesive Sealant-General Purpose One part legacy (Material No.06CMD9) on the surfaces of the seal (40).
B. Installation of the Seal
(1) Put the seal (40) in position.
(2) If the seal has holes, make sure that the holes are on the internal periphery of the seal (40).
(3) Apply a strong force along the length of the seal (40) to make sure that the seal (40) is in contact with the adhesive compound.
(4) Make sure that there is no remaining adhesive compound on the retainer.
(5) Make sure that the external lip of the seal (40) moves freely around the retainer (41) or on the top of the retainer (41).
Subtask 56-12-11-210-069-A (1) Put the seal (40) in position.
(2) If the seal has holes, make sure that the holes are on the internal periphery of the seal (40).
(3) Apply a strong force along the length of the seal (40) to make sure that the seal (40) is in contact with the adhesive compound.
(4) Make sure that there is no remaining adhesive compound on the retainer.
(5) Make sure that the external lip of the seal (40) moves freely around the retainer (41) or on the top of the retainer (41).
C. Sealing Check
(1) Close the sliding window.
(2) Apply water to the periphery of the sliding window from the outer side of the aircraft.
(3) Wait for ten minutes and make sure that there is no water leakage at the level of the window frame.
(4) If water goes into the cockpit, make sure that the adjustments are correct and that the seal is in the correct condition.
(5) Dry if necessary.
5. Close-up(1) Close the sliding window.
(2) Apply water to the periphery of the sliding window from the outer side of the aircraft.
(3) Wait for ten minutes and make sure that there is no water leakage at the level of the window frame.
(4) If water goes into the cockpit, make sure that the adjustments are correct and that the seal is in the correct condition.
(5) Dry if necessary.
Subtask 56-12-11-865-083-A
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 56-12-11-410-060-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 121VU | COM NAV/RADAR/1 | 5SQ1 | K13 |
| ** ON A/C NOT FOR ALL | |||
| 121VU | COM NAV/RADAR/2 | 5SQ2 | K14 |
| ** ON A/C ALL | |||
| 122VU | ANTI ICE/WINDOWS/R | 4DG2 | W14 |
| 122VU | ANTI ICE/WHC/2 | 5DG2 | W13 |
| 122VU | ANTI ICE/WINDOWS/L | 4DG1 | X14 |
| 122VU | ANTI ICE/WHC/1 | 5DG1 | X13 |
| 123VU | ANTI ICE/L/WHSLD | 1DG1 | AF10 |
| 123VU | ANTI ICE/R/WHSLD | 1DG2 | AF03 |
B. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).