Removal of the Handgrip Support Assembly

TASK 53-46-04-000-801-A
Removal of the Handgrip Support Assembly

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 260

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE
No specific	1	SCRAPER - NON METALLIC

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
260	AFT CABIN UTILITY AREA
832, 842

D. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-45-000-003-A	Removal of the Door Frame Linings from the Left Aft Passenger/Crew Door
TASK 25-23-45-000-004-A	Removal of the Door Frame Linings from the Right Aft Passenger/Crew Door
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
Handgrip Support Assembly

3. Job Set-up
Subtask 53-46-04-010-050-A

A. Get Access
(1) Put the ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at passenger/crew door 832( 842).
(2) Open passenger/crew door 832( 842) (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the door frame linings (Ref. AMM TASK 25-23-45-000-003) and (Ref. AMM TASK 25-23-45-000-004).

4. Procedure
Subtask 53-46-04-020-050-A

A. Removal of the Handgrip Support Assembly
(1) Remove the sealant with the Textile-Lint free Cotton - (Material No.14SBA1) made moist with Non Aqueous Cleaner-General - - (Material No.08BAA9) and the SCRAPER - NON METALLIC from:

The bolts (3) and (6) and the screws (4)

Around the handgrip support assemblies (1) and (2).

(2) Remove the bolts (6) and the fitting (5) from the handgrip support assembly (1).
(3) Remove the screws (4), the bolts (3) and the handgrip support assemblies (1) and (2) from the structure (7).

[Rev.10 from 2021] 2026.04.02 06:55:10 UTC