W DOC AIRBUS | AMM A320F

Apply Type I Grade 2 or 3 Temporary Protection to Cabin Floor Structure, Excluding Areas Below Galleys and Toilets and Door Entrance Area

TASK 53-41-00-916-003-A
Apply Type I Grade 2 or 3 Temporary Protection to Cabin Floor Structure, Excluding Areas Below Galleys and Toilets and Door Entrance Area

1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
SCRAPER - NON METALLIC
 B. Consumable Materials
REFERENCE
DESIGNATION
(Material No.08BAA9)
Non Aqueous Cleaner-General - -
(Material No.12ABB1)
Corrosion Preventive Compound-Water Displacing Hard Film -
(Material No.12ABC1)
Corrosion Preventive Compound-Water Displacing Soft Film -
(Material No.14SBA1)
Textile-Lint free Cotton -
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 24-42-00-861-001-A
Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A
De-energize the Ground Service Network Supplied from the External Power
TASK 53-00-00-000-801-A
Removal of the Floor Panels in the Cabin from FR12 to FR70
TASK 53-00-00-000-801-A-01
Removal of the Floor Panels in the Cabin from FR12 to FR70 (Alternative Removal Procedure - Dry Sealing Concept)
TASK 53-00-00-400-801-A
Installation of the Floor Panels in the Cabin from FR12 to FR70
TASK 53-00-00-400-801-A-01
Installation of the Floor Panels in the Cabin from FR12 to FR70 (Alternative Installation Procedure - Dry Sealing Concept)
F Cabin Floor Structure, FR47 to FR70.
3. Job Set-up
Subtask 53-41-00-861-050-A
A. Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
Subtask 53-41-00-010-119-A
B. Get Access
   (1) Remove the necessary equipment and furnishing to get access to the cabin floor panels.
   (2) Remove the necessary floor panels (Ref. AMM TASK 53-00-00-000-801).
Subtask 53-41-00-110-081-A
C. Cleaning Procedure
WARNING: MAKE SURE THAT THERE IS A GOOD FLOW OF AIR THROUGH THE WORK AREA WHEN YOU USE SPECIAL MATERIALS. IF YOU GET ONE OF THESE MATERIALS ON YOUR SKIN, IN YOUR MOUTH OR IN YOUR EYES:
  • FLUSH IT AWAY WITH A FLOW OF CLEAN WATER FOR BETWEEN 10 AND 15 MINUTES.
  • GET IMMEDIATE MEDICAL AID IF IRRITATION OCCURS.
DO NOT BREATHE THE FUMES FROM THE MATERIAL. DO NOT SMOKE WHEN YOU USE THE MATERIAL. DO NOT USE THE MATERIAL NEAR A FLAME, SPARKS OR SOURCES OF HEAT. THESE MATERIALS ARE DANGEROUS: THEY ARE POISONOUS, FLAMMABLE AND SKIN IRRITANTS.
WARNING: OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN YOU USE THIS/THESE MATERIAL/S. USE PROTECTIVE CLOTHING, RUBBER GLOVES, GOGGLES AND A MASK.
   (1) Remove the old temporary protection compound from the area to be treated with a SCRAPER - NON METALLIC and clean with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) . Make sure that the area is dry before you continue.
4. Procedure
CAUTION: DO NOT APPLY TEMPORARY PROTECTION ON THE OXYGEN SYSTEMS. MAKE SURE THAT THE TEMPORARY PROTECTION DOES NOT GET:
  • ON COMPOSITE PARTS, CONTROL CABLES, PULLEYS,TEFLON BEARINGS.
  • ON LUBRICATED SURFACES.
  • IN DRAIN VALVES OR OTHER ORIFICES.
TEMPORARY PROTECTION ON OR IN THESE PARTS CAN CAUSE DAMAGE.
Subtask 53-41-00-916-071-A ** ON A/C NOT FOR ALL
A. Temporary Protection Procedure
F Cabin Floor Structure, FR47 to FR70. ** ON A/C NOT FOR ALL
   (1) Apply Corrosion Preventive Compound-Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) or equivalent to the cabin floor structure, excluding areas below galleys, toilets and door entrance areas, from FR47 to FR70.
Subtask 53-41-00-916-071-B ** ON A/C NOT FOR ALL
A. Temporary Protection Procedure
F Cabin Floor Structure, FR47 to FR70. ** ON A/C NOT FOR ALL
   (1) Apply Corrosion Preventive Compound-Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) or equivalent to the cabin floor structure, excluding areas below galleys, toilets and door entrance areas, from FR47/51 and FR70.
5. Close-up
Subtask 53-41-00-410-116-A
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Install the floor panels (Ref. AMM TASK 53-00-00-400-801).
   (3) Install the equipment and furnishing, removed to get access to the cabin floor panels.
Subtask 53-41-00-862-050-A
B. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).
[Rev.8 from Aug 2017] 2026.04.02 06:29:23 UTC
"WTRUIB" 2025