Detailed Inspection of Visible Part of Window Forgings and Fuselage skin in Window Forging Area, between FR47 and FR65, LH/RH, External Surface

TASK 53-41-00-210-807-A
Detailed Inspection of Visible Part of Window Forgings and Fuselage skin in Window Forging Area, between FR47 and FR65, LH/RH, External Surface

1. Reason for the Job
Refer to the MPD TASK: 534103-01

NOTE: The effectivity of this task is ALL. To know, if this task is applicable for your aircraft, refer to the MPD task applicability and the weight variant data given in the SRM introduction.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Referenced Information

REFERENCE	DESIGNATION
SRM 53002901	(for corrective action)
Window Forgings - Permitted Damage ** ON A/C NOT FOR ALL
Window Forgings - Permitted Damage ** ON A/C NOT FOR ALL
Window Forgings - Permitted Damage ** ON A/C NOT FOR ALL
Window Forgings FR47/51 thru FR65 ** ON A/C NOT FOR ALL
Window Forgings FR47 thru FR65 ** ON A/C NOT FOR ALL
Window Forgings FR47 thru FR64 ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 53-41-00-941-069-A

A. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position adjacent to the window forging.

Subtask 53-41-00-110-090-A

B. Preparation of the Inspection Area
(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If not, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .
(3) Make sure that the inspection areas are dry before you continue.

4. Procedure
Subtask 53-41-00-210-109-A

A. Detailed Inspection

Window Forgings - Permitted Damage ** ON A/C NOT FOR ALL

Window Forgings FR47/51 thru FR65 ** ON A/C NOT FOR ALL

Window Forgings FR47 thru FR65 ** ON A/C NOT FOR ALL

Window Forgings FR47 thru FR64 ** ON A/C NOT FOR ALL

(1) Do a detailed inspection of visible part of window forgings and fuselage skin in window forging area.
(a) For A320, do this between FR47 and FR65. Look for:

Cracks.

(b) For A321, do this between FR47 and FR64. Look for:

Cracks.

Cracks.

(d) For A318, do this between FR47/54 and FR65. Look for:

Cracks.

(2) If necessary, refer to the ASRM SRM 53002901 for the correct repair procedure.

5. Close-up
Subtask 53-41-00-942-091-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(3) Remove the WARNING NOTICE(S).
(4) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

[Rev.8 from Aug 2017] 2026.04.02 06:29:22 UTC