DOC AIRBUS | AMM A320FGeneral Visual Inspection of Cabin Floor Structure, excluding Areas below Galleys and Toilets and Door Entrance Area
TASK 53-41-00-210-801-A
General Visual Inspection of Cabin Floor Structure, excluding Areas below Galleys and Toilets and Door Entrance Area
Refer to the MPD TASK: 534146-01
GENERAL VISUAL INSPECTION OF CABIN FLOOR STRUCTURE, EXCLUDING AREAS BELOW GALLEYS AND TOILETS AND DOOR ENTRANCE AREA, FROM FR 47 TO FR 70
2. Job Set-up Information
A. Consumable Materials
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 53-41-00-010-135-A Subtask 53-41-00-110-086-A
Subtask 53-41-00-210-103-A
Subtask 53-41-00-410-133-A
[Rev.10 from 2021]
2026.04.02 06:29:16 UTC
General Visual Inspection of Cabin Floor Structure, excluding Areas below Galleys and Toilets and Door Entrance Area
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobRefer to the MPD TASK: 534146-01
GENERAL VISUAL INSPECTION OF CABIN FLOOR STRUCTURE, EXCLUDING AREAS BELOW GALLEYS AND TOILETS AND DOOR ENTRANCE AREA, FROM FR 47 TO FR 70
2. Job Set-up Information
A. Consumable Materials
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.12ABB1) | Corrosion Preventive Compound-Water Displacing Hard Film - |
| (Material No.12ABC1) | Corrosion Preventive Compound_Water Displacing Soft Film - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 251 | AFT PASSENGER COMPARTMENT |
| 252 | AFT PASSENGER COMPARTMENT |
| 261 | AFT CABIN UTILITY AREA |
| 262 | AFT CABIN UTILITY AREA |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 51-78-00-916-001-A | Application of Temporary Protection System (TPS) |
| TASK 53-00-00-000-801-A | Removal of the Floor Panels in the Cabin from FR12 to FR70 |
| TASK 53-00-00-000-801-A-01 | Removal of the Floor Panels in the Cabin from FR12 to FR70 (Alternative Removal Procedure - Dry Sealing Concept) |
| TASK 53-00-00-000-801-A-02 | Removal of the Cabin Floor Panels from FR12 to FR70 (Alternative Removal Procedure with the Skyflex Option) |
| TASK 53-00-00-400-801-A | Installation of the Floor Panels in the Cabin from FR12 to FR70 |
| TASK 53-00-00-400-801-A-01 | Installation of the Floor Panels in the Cabin from FR12 to FR70 (Alternative Installation Procedure - Dry Sealing Concept) |
| TASK 53-00-00-400-801-A-02 | Installation of the Cabin Floor Panels from FR12 to FR70 (Alternative Installation Procedure with the Skyflex Option) |
| SRM 511100 | |
| SRM 512200 | |
Cabin Floor StructureSubtask 53-41-00-010-135-A Subtask 53-41-00-110-086-A
B. Preparation of the Inspection Area
(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If not, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and the Textile-Lint free Cotton - (Material No.14SBA1) .
(3) If there is a TPS layer and if it does not let you do a satisfactory inspection, remove the TPS layer (Ref. AMM TASK 51-78-00-916-001).
4. Procedure(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If not, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and the Textile-Lint free Cotton - (Material No.14SBA1) .
(3) If there is a TPS layer and if it does not let you do a satisfactory inspection, remove the TPS layer (Ref. AMM TASK 51-78-00-916-001).
Subtask 53-41-00-210-103-A
A. Inspection
(1) Do a general visual inspection of the cabin floor structure for damage and discontinuities. This inspection does not include the areas below the galleys, the toilets and the door entrance area:
(a) For A318, do this inspection between FR47/54 and FR70.
(b) For A319, do this inspection between FR47/51 and FR70.
(c) For A320 or A321, do this inspection between FR47 and FR70.
(2) Make sure that there is no:
(a) Corrosion:
If you find corrosion, refer to the Structural Repair Manual SRM 512200 for the corrosion types, inspection, removal and subsequent corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find this type of damage, refer to the Structural Repair Manual SRM 511100 for the damage types, classification and corrective action.
Subtask 53-41-00-916-078-A (1) Do a general visual inspection of the cabin floor structure for damage and discontinuities. This inspection does not include the areas below the galleys, the toilets and the door entrance area:
(a) For A318, do this inspection between FR47/54 and FR70.
(b) For A319, do this inspection between FR47/51 and FR70.
(c) For A320 or A321, do this inspection between FR47 and FR70.
(2) Make sure that there is no:
(a) Corrosion:
If you find corrosion, refer to the Structural Repair Manual SRM 512200 for the corrosion types, inspection, removal and subsequent corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find this type of damage, refer to the Structural Repair Manual SRM 511100 for the damage types, classification and corrective action.
B. Check and Application of the TPS Layer
(1) If you removed the TPS at the ”Preparation of the Inspection Area”, apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
(2) If you did not remove the TPS at the ”Preparation of the Inspection Area”, do a check of the condition and integrity of the TPS layer (Ref. AMM TASK 51-78-00-916-001).
(3) If the TPS layer has local damage, remove the damaged TPS layer and apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
5. Close-up(1) If you removed the TPS at the ”Preparation of the Inspection Area”, apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
(2) If you did not remove the TPS at the ”Preparation of the Inspection Area”, do a check of the condition and integrity of the TPS layer (Ref. AMM TASK 51-78-00-916-001).
(3) If the TPS layer has local damage, remove the damaged TPS layer and apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
Subtask 53-41-00-410-133-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the applicable floor panels (Ref. AMM TASK 53-00-00-400-801).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the applicable floor panels (Ref. AMM TASK 53-00-00-400-801).