DOC AIRBUS | AMM A320FDetailed Inspection of Escape Chute Slide Compartment Internal Structure, between FR47.2A and FR47.4 and from Stringer 24 to Stringer 28, LH/RH
TASK 53-41-00-210-049-A
Detailed Inspection of Escape Chute Slide Compartment Internal Structure, between FR47.2A and FR47.4 and from Stringer 24 to Stringer 28, LH/RH
Refer to the MPD TASK: 534187-01
DETAILED INSPECTION OF ESCAPE CHUTE SLIDE COMPARTMENT INTERNAL STRUCTURE, BETWEEN FR 47.2A AND FR 47.4 AND FROM STRINGER 24 TO STRINGER 28, LH/RH
DETAILED INSPECTION OF ESCAPE CHUTE SLIDE COMPARTMENT
INTERNAL STRUCTURE, BETWEEN FR 48A AND FR 50 FROM
STRINGER 24 TO STRINGER 28, LH/RH
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 53-41-00-010-134-A ** ON A/C NOT FOR ALL
Subtask 53-41-00-210-102-A ** ON A/C NOT FOR ALL
Subtask 53-41-00-410-132-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:29:16 UTC
Detailed Inspection of Escape Chute Slide Compartment Internal Structure, between FR47.2A and FR47.4 and from Stringer 24 to Stringer 28, LH/RH
WARNING:
PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobRefer to the MPD TASK: 534187-01
DETAILED INSPECTION OF ESCAPE CHUTE SLIDE COMPARTMENT INTERNAL STRUCTURE, BETWEEN FR 47.2A AND FR 47.4 AND FROM STRINGER 24 TO STRINGER 28, LH/RH
DETAILED INSPECTION OF ESCAPE CHUTE SLIDE COMPARTMENT
INTERNAL STRUCTURE, BETWEEN FR 48A AND FR 50 FROM
STRINGER 24 TO STRINGER 28, LH/RH
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.12ABB1) | Corrosion Preventive Compound-Water Displacing Hard Film - |
| (Material No.12ABC1) | Corrosion Preventive Compound_Water Displacing Soft Film - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 151 | AFT CARGO COMPARTMENT |
| 152 | AFT CARGO COMPARTMENT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 25-62-47-000-001-A | Removal of the Escape Slide Enclosure |
| TASK 25-62-47-400-001-A | Installation of the Escape Slide Enclosure |
| TASK 51-78-00-916-001-A | Application of Temporary Protection System (TPS) |
| SRM 511100 | |
| SRM 512200 | |
Escape Chute Slide-Compartment, Internal Structure from Stringer 24 to Stringer 28Subtask 53-41-00-010-134-A ** ON A/C NOT FOR ALL
A. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the emergency-exit escape chute.
(2) Remove the escape slide enclosure (Ref. AMM TASK 25-62-47-000-001).
Subtask 53-41-00-110-158-A ** ON A/C NOT FOR ALL (1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the emergency-exit escape chute.
(2) Remove the escape slide enclosure (Ref. AMM TASK 25-62-47-000-001).
B. Preparation of the Inspection Area
(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If not, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .
(3) If there is a TPS layer and if it does not let you do a satisfactory inspection, remove the TPS layer (Ref. AMM TASK 51-78-00-916-001).
4. Procedure(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If not, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .
(3) If there is a TPS layer and if it does not let you do a satisfactory inspection, remove the TPS layer (Ref. AMM TASK 51-78-00-916-001).
Subtask 53-41-00-210-102-A ** ON A/C NOT FOR ALL
A. Inspection
(1) Do a detailed inspection of the escape chute slide compartment internal structure from stringer 24 to stringer 28, LH and RH, for damage or discontinuities.
(2) Make sure that there is no:
(a) Corrosion damage:
If you find corrosion, refer to the Structural Repair Manual ( SRM 512200) for the corrosion types, inspection, removal and subsequent corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find this type of damage, refer to the Structural Repair Manual ( SRM 511100) for the damage types, classification and corrective action.
Subtask 53-41-00-916-077-A ** ON A/C NOT FOR ALL (1) Do a detailed inspection of the escape chute slide compartment internal structure from stringer 24 to stringer 28, LH and RH, for damage or discontinuities.
(2) Make sure that there is no:
(a) Corrosion damage:
If you find corrosion, refer to the Structural Repair Manual ( SRM 512200) for the corrosion types, inspection, removal and subsequent corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find this type of damage, refer to the Structural Repair Manual ( SRM 511100) for the damage types, classification and corrective action.
B. Check and Application of the TPS Layer
(1) If the TPS was removed at the "Preparation of the Inspection Area", apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
(2) If the TPS was not removed at the "Preparation of the Inspection Area", do a check of the condition and integrity of the TPS layer (Ref. AMM TASK 51-78-00-916-001).
(3) If the TPS layer has local damage, remove the damaged TPS layer and apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
5. Close-up(1) If the TPS was removed at the "Preparation of the Inspection Area", apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
(2) If the TPS was not removed at the "Preparation of the Inspection Area", do a check of the condition and integrity of the TPS layer (Ref. AMM TASK 51-78-00-916-001).
(3) If the TPS layer has local damage, remove the damaged TPS layer and apply a new layer of Corrosion Preventive Compound_Water Displacing Soft Film - (Material No.12ABC1) or Corrosion Preventive Compound-Water Displacing Hard Film - (Material No.12ABB1) (Ref. AMM TASK 51-78-00-916-001).
NOTE: If, after the check of the condition and integrity, the TPS layer is in the correct condition, Airbus recommends that you apply a new layer as a spray on the existing layer. This is to make sure that the TPS layer continues to give satisfactory corrosion protection.
Subtask 53-41-00-410-132-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Install the escape slide enclosure (Ref. AMM TASK 25-62-47-400-001).
(2) Remove the access platform(s).
(3) Remove the WARNING NOTICE(S).
(4) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(1) Install the escape slide enclosure (Ref. AMM TASK 25-62-47-400-001).
(2) Remove the access platform(s).
(3) Remove the WARNING NOTICE(S).
(4) Remove the ground support and maintenance equipment, the special and standard tools and all other items.