Detailed Visual Inspection of the Skin at the Window Cutout between FR47 and FR47.2 from Stringer 14 to Stringer 18, External Surface LH/RH

TASK 53-41-00-210-046-A
Detailed Visual Inspection of the Skin at the Window Cutout between FR47 and FR47.2 from Stringer 14 to Stringer 18, External Surface LH/RH

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 200

1. Reason for the Job
Refer to the MPD TASK: 534191-01
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

D. Referenced Information

REFERENCE	DESIGNATION
SRM 53411101	(for corrective action)

3. Job Set-up
Subtask 53-41-00-010-130-A ** ON A/C NOT FOR ALL

A. Get Access

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:

THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.

MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

(1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below the windows.
(2) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .

4. Procedure
Subtask 53-41-00-210-099-A ** ON A/C NOT FOR ALL

A. Inspection
(1) Examine the skin at the window cutouts for:

cracks,
corrosion,

NOTE: If necessary, refer to the ASRM SRM 53411101 for the correct repair procedure.

5. Close-up
Subtask 53-41-00-410-128-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Remove the access platform(s).
(2) Remove the WARNING NOTICE(S).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

[Rev.8 from Aug 2017] 2026.04.02 06:29:22 UTC