Detailed Visual Inspection of Aft Passenger/Crew Door Cutout, underneath the scuff-Plate, LH/RH

TASK 53-41-00-210-041-A
Detailed Visual Inspection of Aft Passenger/Crew Door Cutout, underneath the scuff-Plate, LH/RH

ZONE: 100

1. Reason for the Job
Refer to the MPD TASK: 534136-01
DETAILED INSPECTION OF AFT PASSENGER/CREW DOOR CUTOUT, UNDERNEATH THE SCUFF PLATE, LH/RH
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
100	LOWER HALF FUSELAGE INCLUDING RADOME

D. Referenced Information

REFERENCE	DESIGNATION
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
TASK 53-45-15-000-001-A	Removal of the Scuff Plates at the Aft Passenger/Crew Doors
TASK 53-45-15-400-001-A	Installation of the Scuff Plates at the Aft Passenger/Crew Doors
SRM 53411101	(for corrective action)
AFT Passenger/Crew Door Cutout, Underneath the Scuff-Plate, LH/RH

3. Job Set-up
Subtask 53-41-00-010-123-A

A. Get Access
(1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position adjacent to the aft passenger/crew door.
(2) Open the aft passenger/crew doors (Ref. AMM TASK 52-10-00-010-001), from the outside.
(3) Remove the scuff-plates (Ref. AMM TASK 53-45-15-000-001), from the aft passenger/crew doors.

Subtask 53-41-00-110-085-A

B. Cleaning Procedure

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) , if necessary. Make sure that the area is dry before you continue.

4. Procedure
Subtask 53-41-00-210-094-A

A. Detailed Visual Inspection Procedure

AFT Passenger/Crew Door Cutout, Underneath the Scuff-Plate, LH/RH

(1) Do a detailed visual inspection of the aft passenger/crew door cutout, below the scuff-plates, LH and RH, for corrosion.

NOTE: If required, for information on allowable damage, refer to the ASRM skin plates SRM 53411101.

5. Close-up
Subtask 53-41-00-410-120-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the scuff-plates (Ref. AMM TASK 53-45-15-400-001) at the aft passenger/crew doors.
(3) Close the aft passenger/crew doors (Ref. AMM TASK 52-10-00-410-001), from the outside.
(4) Remove the access platform(s).
(5) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

[Rev.10 from 2021] 2026.04.02 06:29:16 UTC