Detailed Visual Inspection of AFT Passenger/Crew Door Cutout Lower Corners including Skin and Doubler underneath the Scuff Plate, LH/RH

TASK 53-41-00-210-021-A
Detailed Visual Inspection of AFT Passenger/Crew Door Cutout Lower Corners including Skin and Doubler underneath the Scuff Plate, LH/RH

ZONE: 170
ZONE: 260

1. Reason for the Job
Refer to the MPD TASK: 534133-01
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
170	AFT CAB U/FLOOR COMPT AFT BHD OF BULK
260	AFT CABIN UTILITY AREA

B. Referenced Information

REFERENCE	DESIGNATION
TASK 53-45-15-000-001-A	Removal of the Scuff Plates at the Aft Passenger/Crew Doors
TASK 53-45-15-400-001-A	Installation of the Scuff Plates at the Aft Passenger/Crew Doors
SRM 53411101	(for corrective action)
Bottom Corners of the Aft Passenger/Crew Door-Cutouts

3. Job Set-up
Subtask 53-41-00-010-093-A

A. Get Access
(1) Remove the corner scuff plates at the AFT passenger/crew doors (Ref. AMM TASK 53-45-15-000-001).

4. Procedure
Subtask 53-41-00-210-078-A

A. Inspection:
(1) Examine the fuselage skin below the scuff plate for:

corrosion,
cracks,
loose or missing rivets,
skin distortion.

NOTE: If necessary, refer to the ASRM SRM 53411101 for the correct repair procedure.

5. Close-up
Subtask 53-41-00-410-094-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the corner scuff plates at the AFT passenger/crew doors (Ref. AMM TASK 53-45-15-400-001).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

[Rev.8 from Aug 2017] 2026.04.02 06:29:22 UTC