Detailed Inspection of AFT Passenger/Crew Door Cutout, Upper Corners, including Skin and Internally the Visible Portion of the Internal Doubler LH/RH

TASK 53-41-00-210-010-A
Detailed Inspection of AFT Passenger/Crew Door Cutout, Upper Corners, including Skin and Internally the Visible Portion of the Internal Doubler LH/RH

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 260
ZONE: 832
ZONE: 842

1. Reason for the Job
Refer to the MPD TASK: 534132-01
DETAILED INSPECTION OF AFT PASSENGER/CREW DOOR CUTOUT, UPPER CORNERS, INCLUDING SKIN AND INTERNALLY THE VISIBLE PORTION OF THE INTERNAL DOUBLER, LH/RH

NOTE: The effectivity of this task is "ALL". To know if this task is applicable to your aircraft, refer to the MPD task applicability.
The information on weight variant groups is given in the MPD and SRM introductions.

2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
260	AFT CABIN UTILITY AREA
832	AFT PASSENGER/CREW DOOR
842	AFT PASSENGER/CREW DOOR

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-10-00-010-001-A	Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A	Closing of the Passenger/Crew Door
SRM 511100
SRM 512200
Top Corners of the Aft Passenger/Crew Door-Cutout, Fuselage Skin and Internal Doubler

3. Job Set-up
Subtask 53-41-00-010-082-A

A. Get Access
(1) Open aft passenger/crew doors 832 and 842 (Ref. AMM TASK 52-10-00-010-001).

Subtask 53-41-00-110-134-A

B. Preparation of the Inspection Area
(1) Make sure that the inspection area is sufficiently clean to do a satisfactory inspection of the area.
(2) If not, clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .

4. Procedure
Subtask 53-41-00-210-067-A

A. Inspection
(1) Do a detailed inspection of the aft passenger/crew door cutout, upper corners, including skin and internally the visible portion of the internal doubler LH/RH, for damage or discontinuities.
(2) Make sure that there is no:
(a) Corrosion damage:
If you find corrosion, refer to the Structural Repair Manual ( SRM 512200) for the corrosion types, inspection, removal and subsequent corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find this type of damage, refer to the Structural Repair Manual ( SRM 511100) for damage types, classification and corrective action.

5. Close-up
Subtask 53-41-00-410-081-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close aft passenger/crew doors 832 and 842 (Ref. AMM TASK 52-10-00-410-001).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.

[Rev.10 from 2021] 2026.04.02 06:29:15 UTC