W DOC AIRBUS | AMM A320F

Detailed Visual Inspection of Lower Skin of Longitudinal Lap Joints in Crack Stopper Areas at Stringer 32 LH, between FR47/51 and FR57, External Surface

TASK 53-41-00-210-009-C
Detailed Visual Inspection of Lower Skin of Longitudinal Lap Joints in Crack Stopper Areas at Stringer 32 LH, between FR47/51 and FR57, External Surface

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:
  • THE FLIGHT CONTROLS
  • THE FLIGHT CONTROL SURFACES
  • THE LANDING GEAR AND THE RELATED DOORS
  • COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.
ZONE: 197
ZONE: 198
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
 B. Consumable Materials
REFERENCE
DESIGNATION
(Material No.08BAA9)
Non Aqueous Cleaner-General - -
(Material No.14SBA1)
Textile-Lint free Cotton -
 C. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
197
REAR FAIRING
198
REAR FAIRING
 D. Referenced Information
REFERENCE
DESIGNATION
TASK 51-74-11-300-001-A
Repair of Corroded Areas
TASK 53-35-13-000-001-A
Removal of the Belly Fairing Access Panels
TASK 53-35-13-000-002-A
Removal of the Quick-Release Access Panels from the Belly Fairing Structure
TASK 53-35-13-400-001-A
Installation of the Belly Fairing Access Panels
TASK 53-35-13-400-002-A
Installation of the Quick-Release Access Panels on the Belly Fairing Structure
SRM 511100
SRM 512200
SRM 534111
F Long Lap Joints at STGR32
3. Job Set-up
Subtask 53-41-00-010-179-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the belly-fairing access panels.
   (2) Remove the belly-fairing access panels 197BB and 197GB (Ref. AMM TASK 53-35-13-000-001) (Ref. AMM TASK 53-35-13-000-002).
Subtask 53-41-00-100-051-A ** ON A/C NOT FOR ALL
B. Cleaning
   (1) Clean the inspection area with the Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint free cloth Textile-Lint free Cotton - (Material No.14SBA1) .
4. Procedure
Subtask 53-41-00-210-147-A ** ON A/C NOT FOR ALL
A. Detailed Inspection
F Long Lap Joints at STGR32 ** ON A/C NOT FOR ALL
   (1) Do the detailed inspection of the lower skin of the lap joints in the crack stopper areas. Do this at STGR32 LH, between FR47/51 and FR57.
   (2) If you find damage:
     (a) Refer to the ASRM SRM 511100 for the class of damage.
     (b) If you find corrosion damage:
     (c) If you find other types of damage:
  • Refer to the ASRM SRM 534111 for the permitted damage limits for this structure
  • Refer to the ASRM SRM 534111 for the repair data for this structure
5. Close-up
Subtask 53-41-00-410-175-A ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Install the belly-fairing access panels 197BB and 197GB (Ref. AMM TASK 53-35-13-400-001) (Ref. AMM TASK 53-35-13-400-002).
   (3) Remove the WARNING NOTICE(S).
   (4) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
[Rev.10 from 2021] 2026.04.02 06:29:15 UTC
"WTRUIB" 2025