W DOC AIRBUS | AMM A320F

Detailed Inspection of Skin around ADF2 Antenna Cutout, between Stringer 1, LH/RH, External Surface

TASK 53-41-00-210-002-A
Detailed Inspection of Skin around ADF2 Antenna Cutout, between Stringer 1, LH/RH, External Surface

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 250
1. Reason for the Job
Refer to the MPD TASK: 534111-01
DETAILED INSPECTION OF SKIN AROUND ADF2 ANTENNA CUTOUT, BETWEEN STRINGER 1, LH/RH, EXTERNAL SURFACE
NOTE: The effectivity of this task is "ALL". To know if this task is applicable to your aircraft, refer to the MPD task applicability.
2. Job Set-up Information
 A. Consumable Materials
REFERENCE
DESIGNATION
(Material No.08BAA9)
Non Aqueous Cleaner-General - -
(Material No.14SBA1)
Textile-Lint free Cotton -
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
250
AFT PASSENGER COMPARTMENT
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 34-53-11-000-001-A
Removal of the ADF Loop and Sense Antenna
TASK 34-53-11-400-001-A
Installation of the Automatic Direction Finder (ADF) Loop and Sense Antenna
TASK 53-41-61-000-801-A
Removal of the Automatic Direction Finder 2 (ADF2) Antenna Cover
TASK 53-41-61-400-801-A
Installation of the Automatic Direction Finder 2 (ADF2) Antenna Cover
SRM 53411101
 (for corrective action)
F Skin Cutout of the ADF2 Antenna
3. Job Set-up
Subtask 53-41-00-010-074-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Remove the ADF2 antenna, if installed (Ref. AMM TASK 34-53-11-000-001).
   (2) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and the Textile-Lint free Cotton - (Material No.14SBA1) .
Subtask 53-41-00-010-074-B ** ON A/C NOT FOR ALL
A. Get Access
   (1) Remove the ADF2 antenna cover, if installed (Ref. AMM TASK 53-41-61-000-801).
   (2) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .
4. Procedure
Subtask 53-41-00-210-057-A
A. Detailed Inspection Procedure
   (1) Do a detailed inspection of the external surface of the fuselage skin around ADF2 antenna cutout.
     (a) For A320, do this between FR48 and FR49 and stringer 1 LH/RH. Look for:
  • Corrosion
  • Cracks.
     (b) For A321, do this between FR47.1 and FR47.2 and stringer 1 LH/RH. Look for:
  • Corrosion
  • Cracks.
     (c) For A319, do this between FR52 and FR53 and stringer 1 LH/RH. Look for:
  • Corrosion
  • Cracks.
     (d) For A318, do this between FR55 and FR56 and stringer 1 LH/RH. Look for:
  • Corrosion
  • Cracks.
   (2) If necessary, refer to the ASRM SRM 53411101 for the correct repair procedure.
5. Close-up
Subtask 53-41-00-410-073-A ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Install the ADF2 antenna, if removed (Ref. AMM TASK 34-53-11-400-001).
   (3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
Subtask 53-41-00-410-073-B ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Install the ADF2 antenna cover, if removed (Ref. AMM TASK 53-41-61-400-801).
   (3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
[Rev.10 from 2021] 2026.04.02 06:29:14 UTC
"WTRUIB" 2025