DOC AIRBUS | AMM A320FReactivation of the Vanes of the Belly-Fairing Louver-Panel
TASK 53-35-00-440-802-A
Reactivation of the Vanes of the Belly-Fairing Louver-Panel
1. Reason for the Job
CDL 53-01
Belly Fairing Vent Louver Vane
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Referenced Information
3. Job Set-up
Subtask 53-35-00-010-060-A
Subtask 53-35-00-440-051-A
Subtask 53-35-00-410-059-A
[Rev.10 from 2021]
2026.04.02 06:29:09 UTC
Reactivation of the Vanes of the Belly-Fairing Louver-Panel
1. Reason for the Job
CDL 53-01
Belly Fairing Vent Louver Vane
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 1M(3 FT) |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 29-10-00-863-001-A | Pressurize the Green Hydraulic System with a Hydraulic Ground Power-Cart |
| TASK 29-10-00-863-002-A | Pressurize the Yellow Hydraulic System with a Hydraulic Ground Power-Cart |
| TASK 29-10-00-863-003-A | Pressurize the Blue Hydraulic System with a Hydraulic Ground Power-Cart |
| TASK 29-10-00-863-003-A-01 | Pressurize the Blue Hydraulic System with the Blue Electric Pump |
| TASK 29-23-00-863-001-A | Pressurize the Green Hydraulic System from the Yellow Hydraulic System through the PTU with the Electric Pump |
| TASK 32-12-00-010-001-A | Open the Main Gear Doors for Access |
| TASK 32-12-00-410-001-A | Close the Main Gear Doors after Access |
| TASK 53-35-13-400-004-A | Installation of the Louver Panel - Panel 147FB (148FB) (for corrective action) |
Subtask 53-35-00-010-060-A
A. Get Access
(1) Open the MLG doors (Ref. AMM TASK 32-12-00-010-001).
(2) Put the ACCESS PLATFORM 1M(3 FT) in position.
4. Procedure(1) Open the MLG doors (Ref. AMM TASK 32-12-00-010-001).
(2) Put the ACCESS PLATFORM 1M(3 FT) in position.
Subtask 53-35-00-440-051-A
A. Reactivation of the vanes of the Belly-Fairing Louver-Panel
(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Install the new belly-fairing louver-panel (Ref. AMM TASK 53-35-13-400-004).
(4) Make an entry in the aircraft log book that the vanes of the belly-fairing louver-panel are reactivated.
(5) Remove the WARNING NOTICE(S).
5. Close-up(1) Clean the component interfaces and the adjacent area.
(2) Do an inspection of the component interfaces and the adjacent area.
(3) Install the new belly-fairing louver-panel (Ref. AMM TASK 53-35-13-400-004).
(4) Make an entry in the aircraft log book that the vanes of the belly-fairing louver-panel are reactivated.
(5) Remove the WARNING NOTICE(S).
Subtask 53-35-00-410-059-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(3) Pressurize the Green, Yellow and Blue hydraulic systems (Ref. AMM TASK 29-23-00-863-001) or (Ref. AMM TASK 29-10-00-863-001), (Ref. AMM TASK 29-10-00-863-002) and (Ref. AMM TASK 29-10-00-863-003).
(4) Close the MLG doors (Ref. AMM TASK 32-12-00-410-001).
(5) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(3) Pressurize the Green, Yellow and Blue hydraulic systems (Ref. AMM TASK 29-23-00-863-001) or (Ref. AMM TASK 29-10-00-863-001), (Ref. AMM TASK 29-10-00-863-002) and (Ref. AMM TASK 29-10-00-863-003).
(4) Close the MLG doors (Ref. AMM TASK 32-12-00-410-001).
(5) Remove the ground support and maintenance equipment, the special and standard tools and all other items.