DOC AIRBUS | AMM A320FPreparation of the Aircraft after Flight with Missing Root Fillet Fairing
TASK 53-35-00-440-001-A
Preparation of the Aircraft after Flight with Missing Root Fillet Fairing
CDL 53-03
Root Fillet Fairing
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 53-35-00-860-054-A Subtask 53-35-00-941-052-A
Subtask 53-35-00-440-050-A
Subtask 53-35-00-410-055-A
[Rev.10 from 2021]
2026.04.02 06:29:09 UTC
Preparation of the Aircraft after Flight with Missing Root Fillet Fairing
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobCDL 53-03
Root Fillet Fairing
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| No specific | AR | SAFETY BARRIER(S) |
| No specific | 1 | WARNING NOTICE(S) |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.05RAB9) | Adhesive Film Tape-- Aluminium Foil - |
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 27-80-00-866-004-A | Extending the Slats on the Ground |
| TASK 27-80-00-866-005-A | Retracting the Slats on the Ground |
| TASK 53-35-11-400-001-A | Installation of the Wing-to-Fuselage Fairings |
Root Fillet FairingSubtask 53-35-00-860-054-A Subtask 53-35-00-941-052-A
B. Safety Precautions
(1) As necessary, use the applicable SAFETY BARRIERS, specified by the operator's instructions and your local regulations.
(2) Put a WARNING NOTICE(S) in the cockpit to tell persons not to operate the flaps or slats.
Subtask 53-35-00-010-056-A (1) As necessary, use the applicable SAFETY BARRIERS, specified by the operator's instructions and your local regulations.
(2) Put a WARNING NOTICE(S) in the cockpit to tell persons not to operate the flaps or slats.
C. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position.
4. Procedure(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position.
Subtask 53-35-00-440-050-A
A. Preparation of the Aircraft after Flight with Missing Root Fillet Fairing
(1) Remove the Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) from the opening of the root fillet fairing.
(2) Clean the area of the root fillet fairing with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1) .
(3) Install a new root fillet fairing (Ref. AMM TASK 53-35-11-400-001).
5. Close-up(1) Remove the Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) from the opening of the root fillet fairing.
(2) Clean the area of the root fillet fairing with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1) .
(3) Install a new root fillet fairing (Ref. AMM TASK 53-35-11-400-001).
Subtask 53-35-00-410-055-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE.
Subtask 53-35-00-942-052-A (1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE.
B. Removal of Equipment
(1) Remove the Safety barriers.
(2) Remove the WARNING NOTICE(S).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(4) Remove the temporary repair record from the aircraft logbook.
Subtask 53-35-00-860-055-A (1) Remove the Safety barriers.
(2) Remove the WARNING NOTICE(S).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(4) Remove the temporary repair record from the aircraft logbook.