Preparation of the Aircraft for Flight with Missing Root Fillet Fairing

TASK 53-35-00-040-001-A
Preparation of the Aircraft for Flight with Missing Root Fillet Fairing

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

Task Summary

Access	Test	Specific Tools	Mhr	E/T	Nb Men
NO	NO	NO	1.0	1.0	1

1. Reason for the Job
CDL 53-03
Root Fillet Fairing
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific	AR	SAFETY BARRIER(S)
No specific	1	WARNING NOTICE(S)

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.05RAB9)	Adhesive Film Tape-- Aluminium Foil -
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Referenced Information

REFERENCE	DESIGNATION
TASK 27-80-00-866-004-A	Extending the Slats on the Ground
TASK 27-80-00-866-005-A	Retracting the Slats on the Ground
Root Fillet Fairing ** ON A/C NOT FOR ALL
Root Fillet Fairing ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 53-35-00-860-052-A

A. Aircraft Maintenance Configuration
(1) Extend the slats (Ref. AMM TASK 27-80-00-866-004).

Subtask 53-35-00-941-051-A

B. Safety Precautions
(1) As necessary, use the applicable SAFETY BARRIERS, specified by the operator's instructions and your local regulations.
(2) Put a WARNING NOTICE(S) in the cockpit to tell persons not to operate the flaps or slats.

Subtask 53-35-00-010-055-A

C. Get Access
(1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position.

4. Procedure
Subtask 53-35-00-040-050-A

A. Preparation of the Aircraft for Flight with Missing Root Fillet Fairing

Root Fillet Fairing ** ON A/C NOT FOR ALL

(1) Clean the area of the root fillet fairing with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1) .
(2) Apply Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) to the opening of the missing root fillet fairing. Cut it to the correct dimensions.
(3) Make the tape smooth from the center to the edges to remove air bubbles. Push the edges down tightly.
(4) Do a check of the condition of the tape before each flight. If the tape is damaged or missing, replace it.

5. Close-up
Subtask 53-35-00-410-054-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE.

Subtask 53-35-00-942-051-A

B. Removal of Equipment
(1) Remove the safety barriers.
(2) Remove the WARNING NOTICE(S).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(4) Make a record in the aircraft logbook that a temporary repair is done.

Subtask 53-35-00-860-053-A

C. Aircraft Maintenance Configuration
(1) Retract the slats (Ref. AMM TASK 27-80-00-866-005).

[Rev.10 from 2021] 2026.04.02 06:29:09 UTC