W DOC AIRBUS | AMM A320F

Detailed Inspection of the Emergency Exit Hatch-Frame (Internal)

TASK 53-31-00-220-811-A
Detailed Inspection of the Emergency Exit Hatch-Frame (Internal)

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 833
ZONE: 834
ZONE: 843
ZONE: 844
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
1
ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE
 B. Consumable Materials
REFERENCE
DESIGNATION
(Material No.08BAA9)
Non Aqueous Cleaner-General - -
(Material No.14SBA1)
Textile-Lint free Cotton -
 C. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
833
EMERGENCY EXITS
834
EMERGENCY EXITS
843
EMERGENCY EXITS
844
EMERGENCY EXITS
 D. Referenced Information
REFERENCE
DESIGNATION
TASK 25-23-47-000-002-A
Removal of the Upper Sidewall Panel Assy 241LW, (242LW), 241CW, (242CW) and 241FW, (242FW)
TASK 25-23-47-400-002-A
Installation of the Upper Sidewall Panel Assy 241LW, (242LW), 241CW, (242CW) and 241FW, (242FW)
F Emergency Exit Hatch-Frame - Inspection Area ** ON A/C NOT FOR ALL
F Emergency Exit Hatch-Frame - Inspection Area ** ON A/C NOT FOR ALL
3. Job Set-up
Subtask 53-31-00-010-138-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below the applicable emergency exit hatch.
   (2) Remove the blocked emergency-exit hatch (Ref. AMM D/O 52-21-11-00).
   (3) Remove the upper sidewall-panel assemblies (Ref. AMM TASK 25-23-47-000-002).
4. Procedure
Subtask 53-31-00-110-142-A ** ON A/C NOT FOR ALL
A. Cleaning
   (1) Make sure that the area for inspection is clean. If necessary, clean the inspection area with Textile-Lint free Cotton - (Material No.14SBA1) made moist with Non Aqueous Cleaner-General - - (Material No.08BAA9) .
Subtask 53-31-00-220-076-A ** ON A/C NOT FOR ALL
B. Detailed Inspection of the Emergency Exit Hatch-Frame (Internal)
   (1) Do the detailed inspection of the emergency exit hatch-frame. Make sure that:
  • There are no cracks
  • There are no dents
  • There is no corrosion or damage
  • There are no loose or damaged fasteners.
NOTE: If damage is found, contact AIRBUS for the applicable repair procedure.
5. Close-up
Subtask 53-31-00-410-135-A ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) Install the upper sidewall-panel assemblies (Ref. AMM TASK 25-23-47-400-002).
   (3) Install the blocked emergency-exit hatch (Ref. AMM D/O 52-21-11-40).
   (4) Remove the access platform(s).
[Rev.10 from 2021] 2026.04.02 07:22:32 UTC
"WTRUIB" 2025