Detailed Inspection of MLG Bay Fuselage Side Panels inside MLG Bay, between FR42 and FR46, including Slanted Frames and Side Box, LH/RH
TASK 53-31-00-210-003-A
Detailed Inspection of MLG Bay Fuselage Side Panels inside MLG Bay, between FR42 and FR46, including Slanted Frames and Side Box, LH/RH
Refer to the MPD TASK: 533105-01
DETAILED INSPECTION OF MLG BAY FUSELAGE SIDE PANELS INSIDE MLG BAY, BETWEEN FR 42 AND FR 46, INCLUDING SLANTED FRAMES AND SIDE BOX, LH/RH
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 53-31-00-941-067-A
Subtask 53-31-00-210-052-A
Subtask 53-31-00-865-053-A
[Rev.10 from 2021]
2026.04.02 06:29:04 UTC
Detailed Inspection of MLG Bay Fuselage Side Panels inside MLG Bay, between FR42 and FR46, including Slanted Frames and Side Box, LH/RH
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobRefer to the MPD TASK: 533105-01
DETAILED INSPECTION OF MLG BAY FUSELAGE SIDE PANELS INSIDE MLG BAY, BETWEEN FR 42 AND FR 46, INCLUDING SLANTED FRAMES AND SIDE BOX, LH/RH
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| No specific | AR | SAFETY BARRIER(S) |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 2 | WARNING NOTICE(S) |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BBB1) | Non Aqueous Cleaner-- Petroleum Based - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 147 | MAIN GEAR WELL AND HYDRAULIC COMPARTMENT |
| 148 | MAIN GEAR WELL AND HYDRAULIC COMPARTMENT |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 29-10-00-863-001-A | Pressurize the Green Hydraulic System with a Hydraulic Ground Power-Cart |
| TASK 29-10-00-863-002-A | Pressurize the Yellow Hydraulic System with a Hydraulic Ground Power-Cart |
| TASK 29-10-00-863-003-A | Pressurize the Blue Hydraulic System with a Hydraulic Ground Power-Cart |
| TASK 29-10-00-863-003-A-01 | Pressurize the Blue Hydraulic System with the Blue Electric Pump |
| TASK 29-10-00-864-001-A | Depressurize the Green Hydraulic System |
| TASK 29-10-00-864-002-A | Depressurize the Yellow Hydraulic System |
| TASK 29-10-00-864-003-A | Depressurize the Blue Hydraulic System |
| TASK 29-23-00-863-001-A | Pressurize the Green Hydraulic System from the Yellow Hydraulic System through the PTU with the Electric Pump |
| TASK 32-00-00-481-001-A | Installation of the Safety Devices on the Landing Gears |
| TASK 32-12-00-010-001-A | Open the Main Gear Doors for Access |
| TASK 32-12-00-410-001-A | Close the Main Gear Doors after Access |
| SRM 53312900 | (for corrective action) |
Subtask 53-31-00-941-067-A
A. Safety Precautions
(1) As necessary, use the applicable SAFETY BARRIERS, specified by the operator's instructions and your local regulations.
(2) Make sure that the ground safety locks are installed on the landing gear (Ref. AMM TASK 32-00-00-481-001).
(3) On the panel 400VU:
Subtask 53-31-00-010-052-A (1) As necessary, use the applicable SAFETY BARRIERS, specified by the operator's instructions and your local regulations.
(2) Make sure that the ground safety locks are installed on the landing gear (Ref. AMM TASK 32-00-00-481-001).
(3) On the panel 400VU:
- make sure that the landing-gear control-lever 6GA is in the DOWN position
- put a WARNING NOTICE(S) in position to tell persons not to operate the landing gear and the MLG doors.
B. Get Access
(1) Open the MLG doors (Ref. AMM TASK 32-12-00-010-001).
(2) Depressurize the Green, Blue and Yellow hydraulic systems (Ref. AMM TASK 29-10-00-864-001), (Ref. AMM TASK 29-10-00-864-002), (Ref. AMM TASK 29-10-00-864-003).
(3) Put the WARNING NOTICE(S) in position to tell persons not to operate the landing gear.
(4) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position.
Subtask 53-31-00-110-104-A (1) Open the MLG doors (Ref. AMM TASK 32-12-00-010-001).
(2) Depressurize the Green, Blue and Yellow hydraulic systems (Ref. AMM TASK 29-10-00-864-001), (Ref. AMM TASK 29-10-00-864-002), (Ref. AMM TASK 29-10-00-864-003).
(3) Put the WARNING NOTICE(S) in position to tell persons not to operate the landing gear.
(4) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position.
C. Preparation of the Inspection Area
(1) Carefully clean the inboard face of the MLG bay side-panels with Non Aqueous Cleaner-- Petroleum Based - (Material No.08BBB1) and a clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1) .
Subtask 53-31-00-865-052-A (1) Carefully clean the inboard face of the MLG bay side-panels with Non Aqueous Cleaner-- Petroleum Based - (Material No.08BBB1) and a clean lint-free cloth Textile-Lint free Cotton - (Material No.14SBA1) .
D. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 49VU | L/G/LGCIU/SYS1/NORM | 1GA | C09 |
| 121VU | HYDRAULIC/LGCIU/SYS2 | 2GA | Q35 |
| 121VU | HYDRAULIC/LGCIU/SYS1/GRND SPLY | 52GA | Q34 |
Subtask 53-31-00-210-052-A
A. Inspection:
(1) Examine the inboard face of the MLG bay side-panels, slanted frames and side boxes between FR42 and FR46 for:
5. Close-up(1) Examine the inboard face of the MLG bay side-panels, slanted frames and side boxes between FR42 and FR46 for:
- cracks,
- corrosion,
NOTE: If necessary, refer to the ASRM SRM 53312900 for the correct repair procedure.
Subtask 53-31-00-865-053-A
A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
Subtask 53-31-00-410-052-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 49VU | L/G/LGCIU/SYS1/NORM | 1GA | C09 |
| 121VU | HYDRAULIC/LGCIU/SYS2 | 2GA | Q35 |
| 121VU | HYDRAULIC/LGCIU/SYS1/GRND SPLY | 52GA | Q34 |
B. Close Access
(1) Pressurize the Green, Blue and Yellow hydraulic systems (Ref. AMM TASK 29-23-00-863-001) or (Ref. AMM TASK 29-10-00-863-001), (Ref. AMM TASK 29-10-00-863-002), (Ref. AMM TASK 29-10-00-863-003).
(2) Close the MLG door (Ref. AMM TASK 32-12-00-410-001).
(3) Remove the access platform(s).
Subtask 53-31-00-942-080-A (1) Pressurize the Green, Blue and Yellow hydraulic systems (Ref. AMM TASK 29-23-00-863-001) or (Ref. AMM TASK 29-10-00-863-001), (Ref. AMM TASK 29-10-00-863-002), (Ref. AMM TASK 29-10-00-863-003).
(2) Close the MLG door (Ref. AMM TASK 32-12-00-410-001).
(3) Remove the access platform(s).
C. Removal of Equipment
(1) Remove the safety barriers.
(2) Remove the WARNING NOTICE(S).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(1) Remove the safety barriers.
(2) Remove the WARNING NOTICE(S).
(3) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
Inboard Face of the MLG Bay Side-Panels