General Visual Inspection of Fuselage External Surface, from Stringer 23 LH/RH to Crown Centerline, except Areas Covered by Belly Fairing

TASK 53-21-00-210-802-A
General Visual Inspection of Fuselage External Surface, from Stringer 23 LH/RH to Crown Centerline, except Areas Covered by Belly Fairing

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 200

1. Reason for the Job
Refer to the MPD TASK: 532164-01
GENERAL VISUAL INSPECTION OF FUSELAGE EXTERNAL SURFACE, FROM STRINGER 23 LH/RH TO CROWN CENTERLINE, EXCEPT AREAS COVERED BY BELLY FAIRING

NOTE: Inspection between FR24 and FR35.

NOTE: The effectivity of this task is "ALL". To know if this task is applicable to your aircraft, refer to the MPD task applicability and the weight variant data given in the SRM introduction.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 6M (20 FT) - ADJUSTABLE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
200	UPPER HALF FUSELAGE

D. Referenced Information

REFERENCE	DESIGNATION
SRM 511100	(for corrective action)
SRM 512200	(for corrective action)
Fuselage External Surface between FR24 and FR35 from STGR23 to the Crown Centerline, Left and Right Sides

3. Job Set-up
Subtask 53-21-00-010-107-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 6M (20 FT) - ADJUSTABLE in position in zone 230.

Subtask 53-21-00-110-124-A ** ON A/C NOT FOR ALL

B. Cleaning of the Structure
(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and with a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.

4. Procedure
Subtask 53-21-00-210-097-A ** ON A/C NOT FOR ALL

A. Inspection

Fuselage External Surface between FR24 and FR35 from STGR23 to the Crown Centerline, Left and Right Sides ** ON A/C NOT FOR ALL

(1) Do a visual inspection of the fuselage external surface between FR24 and FR35, left and right sides. This inspection is applicable from the STGR23 to the crown centerline left and right sides. It is not applicable to the area below the belly fairing.
(2) Make sure that there is no:
(a) Corrosion damage:
If you find corrosion damage, refer to the Structural Repair Manual SRM 512200 for types of corrosion, inspection, removal and corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
If you find other damage, refer to the Structural Repair Manual SRM 511100 for damage classification and corrective action.

5. Close-up
Subtask 53-21-00-410-101-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.02 06:28:56 UTC