Removal of the Collector Grid and the Container

TASK 53-19-41-000-001-A
Removal of the Collector Grid and the Container

ZONE: 120

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
120	AVIONICS COMPARTMENT
812

C. Referenced Information

REFERENCE	DESIGNATION
Collector Grid and Container ** ON A/C NOT FOR ALL
Collector Grid and Container ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 53-19-41-010-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at zone 812.
(2) Open the avionics-compartment access door 812.

4. Procedure
Subtask 53-19-41-020-050-A ** ON A/C NOT FOR ALL

A. Removal of the Collector Grid and the Container

Collector Grid and Container ** ON A/C NOT FOR ALL

(1) Remove the screws (1).
(2) Remove the collector grid (2).
(3) Remove the clamps (7).
(4) Disconnect the ducts (8).
(5) Remove the screws (6) and the washers (5).
(6) Remove the screws (4) and the washers (3).
(7) Remove the container (9).

Subtask 53-19-41-020-050-B ** ON A/C NOT FOR ALL

A. Removal of the Collector Grid and the Container

Collector Grid and Container ** ON A/C NOT FOR ALL

(1) Remove the screws (1).
(2) Remove the collector grid (2).
(3) Remove the cable-tie (7).
(4) Disconnect the ducts (8).
(5) Remove the screws (6) and the washers (5).
(6) Remove the screws (4) and the washers (3).
(7) Remove the container (9).

[Rev.10 from 2021] 2026.04.02 07:24:47 UTC