W DOC AIRBUS | AMM A320F

Operational Check of the Cockpit Drainage Pipe


TASK 53-19-00-710-001-A
Operational Check of the Cockpit Drainage Pipe


ZONE: 120
1. Reason for the Job
Refer to the MPD TASK: 531900-02
OPERATIONAL CHECK OF THE COCKPIT DRAINAGE PIPE
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific
AR
FLASHLIGHT
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
120
AVIONICS COMPARTMENT
824
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 52-41-00-010-002-A
Open the Avionics Compartment Doors for Access
TASK 53-12-13-000-001-A
Removal of the avionics compartment floor panels
TASK 53-12-13-400-001-A
Installation of the avionics compartment floor panels
TASK 53-19-41-000-001-A
Removal of the Collector Grid and the Container
TASK 53-19-41-400-001-A
Installation of the Collector Grid and the Container
3. Job Set-up
Subtask 53-19-00-010-054-A
A. Get Access
   (1) Remove the collector grid (Ref. AMM TASK 53-19-41-000-001).
   (2) Put an ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone 824.
   (3) Open the avionics compartment door 824 (Ref. AMM TASK 52-41-00-010-002).
   (4) Remove the avionics-compartment floor panels (Ref. AMM TASK 53-12-13-000-001).
4. Procedure
Subtask 53-19-00-710-050-A
A. Inspection
   (1) In the avionics compartment:
     (a) Use a FLASHLIGHT to make sure that the drainage pipe connectors on the outputs of the fluid collector are in the correct condition.
     (b) Do a detailed visual inspection of the cockpit drainage pipe:
  • fill the fluid collector with water and do a check of the drainage pipe for leaks.
     (c) If the drainage pipe is blocked, flush the drainage pipe with water.
5. Close-up
Subtask 53-19-00-410-054-A
A. Close Access
   (1) Install the collector grid (Ref. AMM TASK 53-19-41-400-001).
   (2) Install the avionics-compartment floor panels (Ref. AMM TASK 53-12-13-400-001).
   (3) Make sure that the work area is clean and clear of tools and other items.
   (4) Remove the access platform(s).
[Rev.10 from 2021] 2026.04.02 06:28:55 UTC