Detailed Inspection of the Cockpit Grid Collector Assy

TASK 53-19-00-210-001-A
Detailed Inspection of the Cockpit Grid Collector Assy

ZONE: 220

1. Reason for the Job
Refer to the MPD TASK: 531900-01
DETAILED INSPECTION OF THE COCKPIT GRID COLLECTOR ASSY
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	FLASHLIGHT
No specific	AR	SPONGE

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.14SBA1)	Textile-Lint free Cotton -

C. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
220	FWD CAB UTILITY AREAS

D. Referenced Information

REFERENCE	DESIGNATION
Cockpit Collector-Grid Assembly

3. Job Set-up
Subtask 53-19-00-010-050-A

A. Get Access

Cockpit Collector-Grid Assembly

(1) Remove the screws (1).
(2) Remove the collector grid (2).

Subtask 53-19-00-110-050-A

B. Cleaning of the Inspection Area
(1) Clean the inspection area with the SPONGE and a solution of water and soap.
(2) Dry the inspection area with the Textile-Lint free Cotton - (Material No.14SBA1) .

4. Procedure
Subtask 53-19-00-210-050-A

A. Inspection
(1) Do a detailed inspection of the cockpit grid-collector assembly between lavatory A and galley 1 with the FLASHLIGHT, for damage and discontinuities.
(2) Make sure that there is no unwanted material (dirt, water, debris):

If there is unwanted material, obey the instructions given in Para. 3.B. of this procedure to clean the area.

5. Close-up
Subtask 53-19-00-410-050-A

A. Close Access

Cockpit Collector-Grid Assembly

(1) Put the collector grid (2) in position.
(2) Install the screws (1).
(3) Tighten the screws (1).
(4) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.02 06:28:55 UTC