DOC AIRBUS | AMM A320FRepair of the Anti-slip Surface of the Passenger/Crew Floor Panel 221FF(222FF)
TASK 53-12-00-300-002-A
Repair of the Anti-slip Surface of the Passenger/Crew Floor Panel 221FF(222FF)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Referenced Information
3. Job Set-up
Subtask 53-12-00-941-051-A
Subtask 53-12-00-350-051-A
Subtask 53-12-00-942-051-A
[Rev.10 from 2021]
2026.04.02 06:28:49 UTC
Repair of the Anti-slip Surface of the Passenger/Crew Floor Panel 221FF(222FF)
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE |
| No specific | AR | PAPER - ABRASIVE (GRADE 320) |
| No specific | AR | TAPE - MASKING |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.05TBA1) | Adhesive Tape-Slip Resistant - - |
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.08BBD1) | Non Aqueous Cleaner-- Isopropyl Alcohol - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 52-10-00-010-001-A | Opening of the Passenger/Crew Door |
Subtask 53-12-00-941-051-A
A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position.
(2) Open the passenger/crew door 831 (Ref. AMM TASK 52-10-00-010-001).
4. Procedure(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position.
(2) Open the passenger/crew door 831 (Ref. AMM TASK 52-10-00-010-001).
Subtask 53-12-00-350-051-A
A. Repair Procedure
(1) Apply TAPE - MASKING to the adjacent area which you will not rub with the PAPER - ABRASIVE (GRADE 320).
(2) Lightly rub the contact surface of the floor panel 221FF(222FF) with PAPER - ABRASIVE (GRADE 320) or finer to remove the external anti-slip top layer. Do not cause damage to the basic primer.
(3) Clean the surface with a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) made moist with Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-- Isopropyl Alcohol - (Material No.08BBD1) or Non Aqueous Cleaner-General - - (Material No.08BAA9) .
(4) Remove the TAPE - MASKING.
(5) Do an inspection for damaged paint in the areas that had TAPE - MASKING on them.
(6) Let the surface dry for 30 minutes.
(7) Apply the Adhesive Tape-Slip Resistant - - (Material No.05TBA1) .
5. Close-up(1) Apply TAPE - MASKING to the adjacent area which you will not rub with the PAPER - ABRASIVE (GRADE 320).
(2) Lightly rub the contact surface of the floor panel 221FF(222FF) with PAPER - ABRASIVE (GRADE 320) or finer to remove the external anti-slip top layer. Do not cause damage to the basic primer.
(3) Clean the surface with a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) made moist with Non Aqueous Cleaner-General - - (Material No.08BAA9) or Non Aqueous Cleaner-- Isopropyl Alcohol - (Material No.08BBD1) or Non Aqueous Cleaner-General - - (Material No.08BAA9) .
(4) Remove the TAPE - MASKING.
(5) Do an inspection for damaged paint in the areas that had TAPE - MASKING on them.
(6) Let the surface dry for 30 minutes.
(7) Apply the Adhesive Tape-Slip Resistant - - (Material No.05TBA1) .
Subtask 53-12-00-942-051-A
A. Close Access
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Close the passenger/crew door 831 (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the access platform(s).
(1) Remove the ground support and maintenance equipment, the special and standard tools and all other items.
(2) Close the passenger/crew door 831 (Ref. AMM TASK 52-10-00-010-001).
(3) Remove the access platform(s).