DOC AIRBUS | AMM A320FDetailed Inspection of FWD Passenger/Crew Door Cut out, Intercostals Fittings N°7 between FR 15-16 and FR 20-21, LH/RH
TASK 53-11-00-220-802-A
Detailed Inspection of FWD Passenger/Crew Door Cut out, Intercostals Fittings N°7 between FR 15-16 and FR 20-21, LH/RH
Refer to the MPD TASK: 531101-01
DETAILED INSPECTION OF FWD PASSENGER/CREW DOOR CUT OUT, INTERCOSTALS FITTINGS NO 7 BETWEEN FR 15-16 AND FR 20-21, LH/RH
A. Consumable Materials
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 53-11-00-020-071-A
Subtask 53-11-00-220-094-A
Subtask 53-11-00-420-068-A
[Rev.10 from 2021]
2026.04.02 06:28:44 UTC
Detailed Inspection of FWD Passenger/Crew Door Cut out, Intercostals Fittings N°7 between FR 15-16 and FR 20-21, LH/RH
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobRefer to the MPD TASK: 531101-01
DETAILED INSPECTION OF FWD PASSENGER/CREW DOOR CUT OUT, INTERCOSTALS FITTINGS NO 7 BETWEEN FR 15-16 AND FR 20-21, LH/RH
NOTE: The effectivity of this task is "ALL".To know if this task is applicable for your aircraft, refer to the MPD task applicability and the weight variant data given in the SRM introduction.
2. Job Set-up InformationA. Consumable Materials
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 221 | FWD CAB UTILITY AREA |
| 222 | FWD CAB UTILITY AREA |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 25-23-41-000-001-A | Removal of the Ceiling Panels |
| TASK 25-23-41-400-001-A | Installation of the Ceiling Panels |
| TASK 25-23-45-000-002-A | Removal of the Door Frame Linings from the Right Forward Passenger/Crew Door |
| TASK 25-23-45-000-005-A | Removal of the Door Frame Linings from the Left Forward Passenger/Crew Door |
| TASK 25-23-45-400-006-A | Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door |
| TASK 25-23-45-400-007-A | Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door |
| TASK 25-80-00-000-001-A | Removal of the Insulation Blankets |
| TASK 25-80-00-400-001-A | Installation of the Insulation Blankets |
| SRM 511100 | (for corrective action) |
| SRM 512200 | (for corrective action) |
| TASK 25-31-00-00 | FORWARD GALLEY - DESCRIPTION AND OPERATION |
| TASK 25-41-00-00 | FORWARD LAVATORIES - DESCRIPTION AND OPERATION |
Illustration of Forward Passenger/Crew Door Cut out, Intercostals Fittings N°7 between FR 15 and FR 16 and FR 20 and FR 21, LH and RHSubtask 53-11-00-020-071-A
A. Removal of the Component
(1) Remove the galleys and lavatories between FR15 and FR21, if installed.
To do this, refer to the para. Component Location in the applicable ATA 25 Description/Operation: for the galleys (Ref. AMM D/O 25-31-00-00), for the lavatories (Ref. AMM D/O 25-41-00-00). In this paragraph, you will find the cross-references of the removal/installation tasks.
(2) Remove the necessary ceiling panels between FR 15 and FR 21 to get access to the inspection areas (Ref. AMM TASK 25-23-41-000-001).
(3) Remove the necessary lining panels around the frame of the passenger/crew door between FR 16 and FR 20 to get access to the inspection areas (Ref. AMM TASK 25-23-45-000-002) (Ref. AMM TASK 25-23-45-000-005).
(4) Remove the necessary insulation blankets around the frame of the passenger/crew door to get access to the inspection areas (Ref. AMM TASK 25-80-00-000-001).
Subtask 53-11-00-110-126-A (1) Remove the galleys and lavatories between FR15 and FR21, if installed.
To do this, refer to the para. Component Location in the applicable ATA 25 Description/Operation: for the galleys (Ref. AMM D/O 25-31-00-00), for the lavatories (Ref. AMM D/O 25-41-00-00). In this paragraph, you will find the cross-references of the removal/installation tasks.
(2) Remove the necessary ceiling panels between FR 15 and FR 21 to get access to the inspection areas (Ref. AMM TASK 25-23-41-000-001).
(3) Remove the necessary lining panels around the frame of the passenger/crew door between FR 16 and FR 20 to get access to the inspection areas (Ref. AMM TASK 25-23-45-000-002) (Ref. AMM TASK 25-23-45-000-005).
(4) Remove the necessary insulation blankets around the frame of the passenger/crew door to get access to the inspection areas (Ref. AMM TASK 25-80-00-000-001).
B. Cleaning of the Structure
(1) Clean the inspection surface with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
4. Procedure(1) Clean the inspection surface with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
Subtask 53-11-00-220-094-A
A. Inspection
(1) Do a detailed inspection of the forward passenger/crew door cutout, intercostals fittings N°7 between FR 15 and FR 16 and FR 20 and FR 21, LH and RH.
(2) Make sure that there is no:
(a) Corrosion damage:
5. Close-up(1) Do a detailed inspection of the forward passenger/crew door cutout, intercostals fittings N°7 between FR 15 and FR 16 and FR 20 and FR 21, LH and RH.
(2) Make sure that there is no:
(a) Corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 512200 for types, inspection, removal and corrosion protection.
- If you find this type of damage, refer to the Structural Repair Manual SRM 511100 for damage classification and corrective action.
Subtask 53-11-00-420-068-A
A. Installation of the Component
(1) Install the insulation blankets around the frame of the passenger/crew door (Ref. AMM TASK 25-80-00-400-001).
(2) Install the lining panels around the frame of the passenger/crew door between FR 16 and FR 20 (Ref. AMM TASK 25-23-45-400-006) (Ref. AMM TASK 25-23-45-400-007).
(3) Install the ceiling panel on FR 15 and FR 21 (Ref. AMM TASK 25-23-41-400-001).
(4) Install the galleys and lavatories between FR15 and FR21, if removed.
To do this, refer to the para. Component Location in the applicable ATA 25 Description/Operation: for the galleys (Ref. AMM D/O 25-31-00-00), for the lavatories (Ref. AMM D/O 25-41-00-00). In this paragraph, you will find the cross-references of the removal/installation tasks.
Subtask 53-11-00-410-107-A (1) Install the insulation blankets around the frame of the passenger/crew door (Ref. AMM TASK 25-80-00-400-001).
(2) Install the lining panels around the frame of the passenger/crew door between FR 16 and FR 20 (Ref. AMM TASK 25-23-45-400-006) (Ref. AMM TASK 25-23-45-400-007).
(3) Install the ceiling panel on FR 15 and FR 21 (Ref. AMM TASK 25-23-41-400-001).
(4) Install the galleys and lavatories between FR15 and FR21, if removed.
To do this, refer to the para. Component Location in the applicable ATA 25 Description/Operation: for the galleys (Ref. AMM D/O 25-31-00-00), for the lavatories (Ref. AMM D/O 25-41-00-00). In this paragraph, you will find the cross-references of the removal/installation tasks.
B. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(1) Make sure that the work area is clean and clear of tools and other items.