Detailed Inspection of Door Stop Fittings on FR 16 and FR 20, LH/RH

TASK 53-11-00-210-017-A
Detailed Inspection of Door Stop Fittings on FR 16 and FR 20, LH/RH

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 221
ZONE: 222

1. Reason for the Job
Refer to the MPD TASK: 531151-01
DETAILED INSPECTION OF DOOR STOP FITTINGS ON FR 16 AND FR 20, LH/RH
2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
221	FWD CAB UTILITY AREA
222	FWD CAB UTILITY AREA

C. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-45-000-002-A	Removal of the Door Frame Linings from the Right Forward Passenger/Crew Door
TASK 25-23-45-000-005-A	Removal of the Door Frame Linings from the Left Forward Passenger/Crew Door
TASK 25-23-45-400-006-A	Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door
TASK 25-23-45-400-007-A	Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door
SRM 511100	(for corrective action)
SRM 512200	(for corrective action)
Stop Fittings on the Frame of the Forward Passenger/Crew Door - Left and Right Sides

3. Job Set-up
Subtask 53-11-00-010-059-A

A. Get Access
(1) Remove the necessary lining panels around the frame of passenger/crew door between FR 16 and FR 20 to get access to the inspection areas (Ref. AMM TASK 25-23-45-000-005) and (Ref. AMM TASK 25-23-45-000-002).

Subtask 53-11-00-110-073-A

B. Cleaning of the Structure
(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.

4. Procedure
Subtask 53-11-00-220-081-A

A. Inspection

Stop Fittings on the Frame of the Forward Passenger/Crew Door - Left and Right Sides

(1) Do a detailed inspection of the structure of the stop fittings of the door frame at FR16 and FR20 (left and right sides).
(2) Make sure that there is no:
(a) corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 512200 for types, inspection, removal and corrosion protection.
(b) other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 511100 for damage classification and corrective action.

5. Close-up
Subtask 53-11-00-410-059-A

A. Close Access
(1) Install the lining panels around the frame of passenger/crew door between FR 16 and FR 20 (Ref. AMM TASK 25-23-45-400-006) and (Ref. AMM TASK 25-23-45-400-007).
(2) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.02 06:28:42 UTC