DOC AIRBUS | AMM A320FDetailed Inspection of Side Window Structure, Upper Junction, between Forward and Rear FR, External Surface, LH/RH
TASK 53-11-00-210-015-A
Detailed Inspection of Side Window Structure, Upper Junction, between Forward and Rear FR, External Surface, LH/RH
Refer to the MPD TASK: 531141-01
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 53-11-00-941-063-A
Subtask 53-11-00-220-080-A
Subtask 53-11-00-942-063-A
[Rev.8 from Aug 2017]
2026.04.02 06:28:49 UTC
Detailed Inspection of Side Window Structure, Upper Junction, between Forward and Rear FR, External Surface, LH/RH
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 200
1. Reason for the JobNOTE: The effectivity of this task is "ALL". To know if this task is applicable for your aircraft, refer to the MPD task applicability and the weight variant data given in the SRM introduction.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 4M (13 FT) |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 200 | UPPER HALF FUSELAGE |
| REFERENCE | DESIGNATION |
|---|---|
| SRM 51110001 | (for corrective action) |
| SRM 51220001 | (for corrective action) |
External Surface of the Upper Junction of the Side Window Stucture - Forward and Aft of the FrameSubtask 53-11-00-941-063-A
A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT) in position at the zone 211 (212).
Subtask 53-11-00-110-072-A (1) Put an ACCESS PLATFORM 4M (13 FT) in position at the zone 211 (212).
B. Cleaning of the Structure
(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
4. Procedure(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
Subtask 53-11-00-220-080-A
A. Inspection
(1) Do a detailed inspection of the structure of the external surface of the upper junction of the side windows. This inspection is applicable forward and aft of the frame, left and right sides.
(2) Make sure that there is no:
(a) corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
(b) other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.
5. Close-up(1) Do a detailed inspection of the structure of the external surface of the upper junction of the side windows. This inspection is applicable forward and aft of the frame, left and right sides.
(2) Make sure that there is no:
(a) corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
(b) other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.
Subtask 53-11-00-942-063-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).