Detailed Inspection of Windshield Center Post, Upper Attachment Area, Internal Side

TASK 53-11-00-210-013-A
Detailed Inspection of Windshield Center Post, Upper Attachment Area, Internal Side

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

ZONE: 211
ZONE: 212

1. Reason for the Job
Refer to the MPD TASK: 531131-01

NOTE: The effectivity of this task is "ALL". To know if this task is applicable for your aircraft, refer to the MPD task applicability and the weight variant data given in the SRM introduction.

2. Job Set-up Information
A. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BAA9)	Non Aqueous Cleaner-General - -
(Material No.14SBA1)	Textile-Lint free Cotton -

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
211	COCKPIT
212	COCKPIT
211LC, 211MC, 211MW, 212LC

C. Referenced Information

REFERENCE	DESIGNATION
SRM 51110001	(for corrective action)
SRM 51220001	(for corrective action)
Linings of the Upper Attachment of the Windshield Center Post
Upper Attachment of the Windshield Center Post - Internal Side

3. Job Set-up
Subtask 53-11-00-010-056-A

A. Get Access
(1) Remove the vertical lining panels 211MC 211MW from the windshield center post.

Linings of the Upper Attachment of the Windshield Center Post

(2) Remove the ceiling panels 211LC 212LC.

Linings of the Upper Attachment of the Windshield Center Post

Subtask 53-11-00-110-068-A

B. Cleaning of the Structure
(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.

4. Procedure
Subtask 53-11-00-220-078-A

A. Inspection

Upper Attachment of the Windshield Center Post - Internal Side

(1) Do a detailed inspection of the structure of the upper attachment of the windshield center post, internal side.
(2) Make sure that there is no:
(a) Corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
(b) Other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.

5. Close-up
Subtask 53-11-00-410-056-A

A. Close Access
(1) Install the ceiling panels 211LC 212LC.
(2) Install the lining panels 211MC 211MW on the windshield center post.
(3) Make sure that the work area is clean and clear of tools and other items.

[Rev.8 from Aug 2017] 2026.04.02 06:28:48 UTC