DOC AIRBUS | AMM A320FDetailed Inspection of Outer Skin of Lateral Longitudinal Lap Joint, between FR 1 and FR 24, LH/RH
TASK 53-11-00-210-010-A
Detailed Inspection of Outer Skin of Lateral Longitudinal Lap Joint, between FR 1 and FR 24, LH/RH
Refer to the MPD TASK: 531123-01
DETAILED INSPECTION OF OUTER SKIN OF LATERAL LONGITUDINAL LAP JOINT, BETWEEN FR 1 AND FR 24, LH/RH
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 53-11-00-941-058-A
Subtask 53-11-00-220-075-A
Subtask 53-11-00-942-058-A
[Rev.10 from 2021]
2026.04.02 06:28:42 UTC
Detailed Inspection of Outer Skin of Lateral Longitudinal Lap Joint, between FR 1 and FR 24, LH/RH
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 100
1. Reason for the JobRefer to the MPD TASK: 531123-01
DETAILED INSPECTION OF OUTER SKIN OF LATERAL LONGITUDINAL LAP JOINT, BETWEEN FR 1 AND FR 24, LH/RH
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 100 | LOWER HALF FUSELAGE INCLUDING RADOME |
| REFERENCE | DESIGNATION |
|---|---|
| SRM 51110001 | (for corrective action) |
| SRM 51220001 | (for corrective action) |
Lateral-Longitudinal Lap Joints - Outer Skin from FR1 to FR24Subtask 53-11-00-941-058-A
A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at the zone 120.
Subtask 53-11-00-110-064-A (1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at the zone 120.
B. Cleaning of the Structure
(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
4. Procedure(1) Clean the inspection area with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
Subtask 53-11-00-220-075-A
A. Inspection
(1) Do a detailed inspection of the outer skin of the lateral-longitudinal lap joints. This inspection is applicable from FR1 to FR24, left and right sides.
(2) Make sure that there is no:
(a) corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
(b) other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.
5. Close-up(1) Do a detailed inspection of the outer skin of the lateral-longitudinal lap joints. This inspection is applicable from FR1 to FR24, left and right sides.
(2) Make sure that there is no:
(a) corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
(b) other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.
Subtask 53-11-00-942-058-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).