DOC AIRBUS | AMM A320FDetailed Inspection of Outer Skin of Lateral Longitudinal Lap Joint, between FR 11 and FR 14 and FR 20 and FR 24, LH/RH
TASK 53-11-00-210-009-A
Detailed Inspection of Outer Skin of Lateral Longitudinal Lap Joint, between FR 11 and FR 14 and FR 20 and FR 24, LH/RH
Refer to the MPD TASK: 531121-01
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 53-11-00-941-057-A
Subtask 53-11-00-220-074-A
Subtask 53-11-00-942-057-A
[Rev.8 from Aug 2017]
2026.04.02 06:28:48 UTC
Detailed Inspection of Outer Skin of Lateral Longitudinal Lap Joint, between FR 11 and FR 14 and FR 20 and FR 24, LH/RH
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 100
1. Reason for the JobNOTE: The effectivity of this task is "ALL". To know if this task is applicable for your aircraft, refer to the MPD task applicability and the weight variant data given in the SRM introduction.
2. Job Set-up InformationA. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 100 | LOWER HALF FUSELAGE INCLUDING RADOME |
| REFERENCE | DESIGNATION |
|---|---|
| SRM 51110001 | (for corrective action) |
| SRM 51220001 | (for corrective action) |
Lateral-Longitudinal Lap Joints - Outer Skin from FR11 to FR14 and FR20 to FR24Subtask 53-11-00-941-057-A
A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at the zone 120.
Subtask 53-11-00-110-061-A (1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at the zone 120.
B. Cleaning of the Structure
(1) Clean the inspection areas with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
4. Procedure(1) Clean the inspection areas with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
Subtask 53-11-00-220-074-A
A. Inspection
(1) Do a detailed inspection of the outer skin of the lateral-longitudinal lap joints. This inspection is applicable between FR11 and FR14, and between FR20 and FR24, left and right sides.
(2) Make sure that there is no:
(a) corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
(b) other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.
5. Close-up(1) Do a detailed inspection of the outer skin of the lateral-longitudinal lap joints. This inspection is applicable between FR11 and FR14, and between FR20 and FR24, left and right sides.
(2) Make sure that there is no:
(a) corrosion damage:
- If you find corrosion damage, refer to the Structural Repair Manual SRM 51220001 for types, inspection, removal and corrosion protection.
(b) other damage (scratches, cracks, gouges, dents, creases):
- If you find other damage, refer to the Structural Repair Manual SRM 51110001 for damage classification and corrective action.
Subtask 53-11-00-942-057-A
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Remove the access platform(s).