W DOC AIRBUS | AMM A320F

Special Detailed Inspection (ENDOSCOPE) of FWD Passenger/Crew Door Cutout, Intercostals Fittings N°7 between FR 15-16 and FR 20-21, LH/RH

TASK 53-11-00-200-804-A
Special Detailed Inspection (ENDOSCOPE) of FWD Passenger/Crew Door Cutout, Intercostals Fittings N°7 between FR 15-16 and FR 20-21, LH/RH

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 221
ZONE: 222
1. Reason for the Job
Refer to the MPD TASK: 531101-02
SPECIAL DETAILED INSPECTION (ENDOSCOPE) OF FWD PASSENGER/CREW DOOR CUTOUT, INTERCOSTALS FITTINGS NO 7 BETWEEN FR 15-16 AND FR 20-21, LH/RH

NOTE: THIS TASK IS AN ALTERNATIVE TO TASK 531101-01.
2. Job Set-up Information
 A. Consumable Materials
REFERENCE
DESIGNATION
(Material No.08BAA9)
Non Aqueous Cleaner-General - -
(Material No.14SBA1)
Textile-Lint free Cotton -
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
221
FWD CAB UTILITY AREA
222
FWD CAB UTILITY AREA
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 25-23-41-000-001-A
Removal of the Ceiling Panels
TASK 25-23-41-400-001-A
Installation of the Ceiling Panels
TASK 25-23-45-000-002-A
Removal of the Door Frame Linings from the Right Forward Passenger/Crew Door
TASK 25-23-45-000-005-A
Removal of the Door Frame Linings from the Left Forward Passenger/Crew Door
TASK 25-23-45-400-006-A
Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door
TASK 25-23-45-400-007-A
Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door
TASK 25-80-00-000-001-A
Removal of the Insulation Blankets
TASK 25-80-00-400-001-A
Installation of the Insulation Blankets
NTM 519000
SRM 511100
 (for corrective action)
SRM 512200
 (for corrective action)
F Illustration of Forward Passenger/Crew Door Cutout, Intercostals between FR 15 and FR 16 and FR 20 and FR 21, LH and RH
3. Job Set-up
Subtask 53-11-00-010-120-A
A. Get Access
   (1) Remove the necessary ceiling panels between FR 15 and FR 21 to get access to the inspection areas (Ref. AMM TASK 25-23-41-000-001).
   (2) Remove the necessary lining panels around the frame of the passenger/crew door between FR 16 and FR 20 to get access to the inspection areas (Ref. AMM TASK 25-23-45-000-002) (Ref. AMM TASK 25-23-45-000-005).
   (3) Remove the necessary insulation blankets around the frame of the passenger/crew door to get access to the inspection areas (Ref. AMM TASK 25-80-00-000-001).
Subtask 53-11-00-110-139-A
B. Preparation of Inspection Area
   (1) Clean the inspection surface with Non Aqueous Cleaner-General - - (Material No.08BAA9) and a lint-free cotton cloth Textile-Lint free Cotton - (Material No.14SBA1) , if necessary.
   (2) Make sure that the surface of the inspection area is clean and smooth.
   (3) Do a visual check of the inspection area for damage and discontinuities.
   (4) Make sure that there is no:
     (a) Corrosion damage:
  • If you find corrosion damage, refer to the Structural Repair Manual SRM 512200 for types, inspection, removal and corrosion protection.
     (b) Other damage (cracks, scratches, stress, marks, dents, bumps, etc.):
  • If you find this type of damage, refer to the Structural Repair Manual SRM 511100 for damage classification and corrective action.
4. Procedure
Subtask 53-11-00-280-052-A
A. Inspection
F Illustration of Forward Passenger/Crew Door Cutout, Intercostals between FR 15 and FR 16 and FR 20 and FR 21, LH and RH
   (1) Do a special detailed inspection of the forward passenger/crew door cutout, intercostals fittings N°7 between FR 15-16 and FR 20-21, LH/RH. Refer to the Non-destructive Testing Manual NTM 519000.
   (2) Make a report of damage after NDT inspection:
     (a) Corrosion damage:
  • If you find corrosion damage, refer to the Structural Repair Manual SRM 512200 for types, inspection, removal and corrosion protection.
     (b) Other damage (cracks, scratches, stress, marks, dents, bumps, etc.):
  • If you find this type of damage, refer to the Structural Repair Manual SRM 511100 for damage classification and corrective action.
5. Close-up
Subtask 53-11-00-410-120-A
A. Close Access
   (1) Install the insulation blankets around the frame of the passenger/crew door (Ref. AMM TASK 25-80-00-400-001).
   (2) Install the lining panels around the frame of the passenger/crew door between FR 16 and FR 20 (Ref. AMM TASK 25-23-45-400-006) (Ref. AMM TASK 25-23-45-400-007).
   (3) Install the ceiling panel between FR 15 and FR 21 (Ref. AMM TASK 25-23-41-400-001).
   (4) Make sure that the work area is clean and clear of tools and other items.
[Rev.10 from 2021] 2026.04.02 06:28:46 UTC
"WTRUIB" 2025