W DOC AIRBUS | AMM A320F

Temporary Repair of the Door Scuff Plates with High Speed Tape

TASK 53-00-00-300-802-A
Temporary Repair of the Door Scuff Plates with High Speed Tape

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 130
ZONE: 150
ZONE: 160
ZONE: 220
ZONE: 230
ZONE: 240
ZONE: 250
ZONE: 260
1. Reason for the Job
NOTE: This task is applicable only when you apply the high speed tape to prevent air leak noise from the scuff plate.
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
ACCESS PLATFORM 6M (20 FT) - ADJUSTABLE
 B. Consumable Materials
REFERENCE
DESIGNATION
(Material No.05RAB9)
Adhesive Film Tape-- Aluminium Foil -
(Material No.08BAA9)
Non Aqueous Cleaner-General - -
(Material No.14SBA1)
Textile-Lint free Cotton -
 C. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
130
FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX
150
AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT
160
BULK CARGO COMPARTMENT AFT BULKHEAD OF AFT CARGO COMPARTMENT TO AFT BULKHEAD OF BULK CARGO COMPARTMENT
220
FWD CAB UTILITY AREAS
230
FWD PASSENGER COMPARTMENT
240
MID PASSENGER COMPARTMENT
250
AFT PASSENGER COMPARTMENT
260
AFT CABIN UTILITY AREA
 D. Referenced Information
REFERENCE
DESIGNATION
TASK 52-10-00-010-001-A
Opening of the Passenger/Crew Door
TASK 52-10-00-410-001-A
Closing of the Passenger/Crew Door
TASK 52-22-00-010-001-A
Opening of the Emergency Exit Doors from the Passenger Compartment
TASK 52-22-00-010-802-A
Opening of the Overwing Emergency-Exit Door from the Passenger Compartment
TASK 52-22-00-410-001-A
Closing of the Emergency Exit Doors from the Passenger Compartment
TASK 52-22-00-410-802-A
Closing of the Overwing Emergency-Exit Door from the Passenger Compartment
TASK 52-30-00-860-001-A
Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-002-A
Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-006-A
Open the Bulk Cargo-Compartment Door
TASK 52-30-00-860-008-A
Close the Bulk Cargo-Compartment Door
F High Speed Tape Installation on the Scuff Plates ** ON A/C NOT FOR ALL
F High Speed Tape Installation on the Scuff Plates ** ON A/C NOT FOR ALL
F High Speed Tape Installation on the Scuff Plates ** ON A/C NOT FOR ALL
F High Speed Tape Installation on the Scuff Plates ** ON A/C NOT FOR ALL
3. Job Set-up
Subtask 53-00-00-010-052-A ** ON A/C NOT FOR ALL
A. Get Access
   (1) Put the ACCESS PLATFORM 6M (20 FT) - ADJUSTABLE in position below the applicable door.
   (2) Open the applicable door:
   (3) If necessary, remove the door net from the opening of the bulk cargo-compartment door.
Subtask 53-00-00-010-052-B ** ON A/C NOT FOR ALL
A. Get Access
   (1) Put the ACCESS PLATFORM 6M (20 FT) - ADJUSTABLE in position below the applicable door.
   (2) Open the applicable door:
   (3) If necessary, remove the door net from the opening of the bulk cargo-compartment door.
Subtask 53-00-00-110-051-A
B. Preparation of the Repair Area
   (1) Make sure that the surface of the repair area is clean.
   (2) If necessary, clean the repair area with the Non Aqueous Cleaner-General - - (Material No.08BAA9) and a Textile-Lint free Cotton - (Material No.14SBA1) .
4. Procedure
Subtask 53-00-00-350-051-A
A. Repair of the Door Scuff Plates with the High Speed Tape
   (1) Install the Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) (2) on the door scuff plate (1) and the structure (3).
   (2) Install a minimum two layers of the Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) (2) on the scuff plate (1) and the structure (3).
NOTE: This repair is accepted for 900 Flight Hours. General visual inspection of the repaired area is necessary once a 10 Flight Cycles.
5. Close-up
Subtask 53-00-00-410-052-A ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) If removed, install the door net in the opening of the bulk cargo-compartment door.
   (3) Close the opened door:
   (4) Remove the access platform(s).
Subtask 53-00-00-410-052-B ** ON A/C NOT FOR ALL
A. Close Access
   (1) Make sure that the work area is clean and clear of tools and other items.
   (2) If removed, install the door net in the opening of the bulk cargo-compartment door.
   (3) Close the opened door:
   (4) Remove the access platform(s).
[Rev.10 from 2021] 2026.04.02 06:28:41 UTC
"WTRUIB" 2025