Removal of the Proximity Switches

TASK 52-71-12-000-001-A
Removal of the Proximity Switches

ZONE: 825
ZONE: 826
FIN: 28WV
FIN: 34WV

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific	AR	CAP - BLANKING
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
825	FORWARD CARGO COMPARTMENT DOOR
826	AFT CARGO COMPARTMENT DOOR
825AR, 826AR

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-002-A	Close the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-31-14-000-801-A	Removal of the FWD Cargo-Compartment Door Access-Panel
TASK 52-32-14-000-801-A	Removal of the Aft Cargo-Compartment-Door Access-Panels
Proximity Switches 28WV and 34WV ** ON A/C NOT FOR ALL
Proximity Switches 28WV and 34WV ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 52-71-12-010-050-B ** ON A/C NOT FOR ALL

A. Get Access
(1) Make sure that the applicable cargo door is correctly closed and locked (Ref. AMM TASK 52-30-00-860-002)
(2) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position for the applicable cargo door.
(3) Remove access panel(s) 825AR and/or 826AR to remove the handle flap
(Ref. AMM TASK 52-31-14-000-801) and (Ref. AMM TASK 52-32-14-000-801).

Subtask 52-71-12-010-050-D ** ON A/C NOT FOR ALL

A. Get Access
(1) Make sure that the applicable cargo door is correctly closed and locked (Ref. AMM TASK 52-30-00-860-002)
(2) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position for the applicable cargo door.
(3) Remove the screws (14), the washers (13) and the inner access panel (12) from the AFT cargo door.

Proximity Switches 28WV and 34WV ** ON A/C NOT FOR ALL

Subtask 52-71-12-865-050-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
49VU	L/G/LGCIU/SYS1/NORM	1GA	C09
122VU	DOORS/CARGO	1MJ	T12

4. Procedure
Subtask 52-71-12-020-050-B

A. Removal of Proximity Switch

Proximity Switches 28WV and 34WV ** ON A/C NOT FOR ALL

(1) Remove the proximity sensor (4) as follows:
(a) Pull the door handle (6) away from the recess of the door structure but keep the cargo door latched.
(b) Disconnect the electrical connector (3) from the proximity sensor (4).
(c) Install CAP - BLANKINGS on the electrical connector (3) and the receptacle of the proximity sensor (4).
(d) Remove the nuts (10), the washers (11), the bolts (2) and the proximity sensor (4) from the bracket (1).
(2) Remove the target (9) as follows:
(a) Pull the door handle (6) away from the recess of the door structure but keep the cargo door latched.
(b) Remove the nuts (8), the washers (7), the bolts (5) and the target (9) from the door handle (6).

[Rev.10 from 2021] 2026.04.02 06:28:32 UTC