W DOC AIRBUS | AMM A320F

Installation of the Proximity Switches of the Passenger/Crew Door

TASK 52-71-11-400-001-A
Installation of the Proximity Switches of the Passenger/Crew Door

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
ZONE: 221
ZONE: 222
ZONE: 261
ZONE: 262
ZONE: 831
ZONE: 832
ZONE: 841
ZONE: 842
FIN: 11WV1
FIN: 11WV2
FIN: 13WV1
FIN: 13WV2
FIN: 15WV1
FIN: 15WV2
FIN: 17WV1
FIN: 17WV2
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Consumable Materials
REFERENCE
DESIGNATION
FOR [11WV1] (PROX SW-HOOK, L FWD PAX/CREW DOOR)
FOR [11WV2] (PROX SW-HOOK, R FWD PAX/CREW DOOR)
FOR [15WV1] (PROX SW-HOOK, L AFT PAX/CREW DOOR)
FOR [15WV2] (PROX SW-HOOK, R AFT PAX/CREW DOOR)
(Material No.14QDB1)
Wire-Locking Dia: 0.5 mm (0.020 inch) CRES Nickel Alloy -
FOR [13WV1] (PROX SW-HANDLE, L FWD PAX/CREW DOOR)
FOR [13WV2] (PROX SW-HANDLE, R FWD PAX/CREW DOOR)
(Material No.14QDB1)
Wire-Locking Dia: 0.5 mm (0.020 inch) CRES Nickel Alloy -
FOR [17WV1] (PROX SW-HANDLE, L AFT PAX/CREW DOOR)
FOR [17WV2] (PROX SW-HANDLE, R AFT PAX/CREW DOOR)
(Material No.14QDB1)
Wire-Locking Dia: 0.5 mm (0.020 inch) CRES Nickel Alloy -
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
221
FWD CAB UTILITY AREA
222
FWD CAB UTILITY AREA
261
AFT CABIN UTILITY AREA
262
AFT CABIN UTILITY AREA
831
FORWARD PASSENGER/CREW DOOR
832
AFT PASSENGER/CREW DOOR
841
FORWARD PASSENGER/CREW DOOR
842
AFT PASSENGER/CREW DOOR
831, 832, 841, 842
 C. Referenced Information
REFERENCE
DESIGNATION
TASK 24-42-00-861-001-A
Energize the Ground Service Network from the External Power
TASK 24-42-00-862-001-A
De-energize the Ground Service Network Supplied from the External Power
TASK 52-10-00-410-001-A
Closing of the Passenger/Crew Door
TASK 52-10-00-860-001-A
Special Precautions before Work on the Passenger/Crew Door
TASK 52-10-00-860-002-A
Special Precautions after Work on the Passenger/Crew Door
TASK 52-71-00-710-001-A
Operational Test of the Door Warning System
TASK 06-41-53-00
FUSELAGE-DESCRIPTION AND OPERATION
FOR [11WV1] (PROX SW-HOOK, L FWD PAX/CREW DOOR)
TASK 25-23-45-400-006-A
Installation of the Door Frame Linings on the Left Forward Passenger/Crew Door
FOR [11WV1] (PROX SW-HOOK, L FWD PAX/CREW DOOR)
FOR [11WV2] (PROX SW-HOOK, R FWD PAX/CREW DOOR)
FOR [15WV1] (PROX SW-HOOK, L AFT PAX/CREW DOOR)
FOR [15WV2] (PROX SW-HOOK, R AFT PAX/CREW DOOR)
TASK 52-71-00-820-001-A
Adjustment of the Proximity Switches of the Locking Hook of the Passenger/Crew Doors with the Doors Checking Tool
TASK 52-71-00-820-001-A-01
Adjustment of the Proximity Switches of the Locking Hook of the Passenger/Crew Doors with the ECAM Display Unit (DU)
F Proximity Switches (11WV1,11WV2,15WV1,15WV2)
FOR [11WV2] (PROX SW-HOOK, R FWD PAX/CREW DOOR)
TASK 25-23-45-400-007-A
Installation of the Door Frame Linings on the Right Forward Passenger/Crew Door
FOR [13WV1] (PROX SW-HANDLE, L FWD PAX/CREW DOOR)
TASK 25-23-46-400-001-A
Installation of the Door Linings on the Forward Passenger/Crew Doors
FOR [13WV1] (PROX SW-HANDLE, L FWD PAX/CREW DOOR)
FOR [13WV2] (PROX SW-HANDLE, R FWD PAX/CREW DOOR)
TASK 52-71-00-820-002-A
Adjustment of the Proximity Switches of the Passenger/Crew Doors with the Doors Checking Tool
TASK 52-71-00-820-002-A-01
Adjustment of the Proximity Switches of the Passenger/Crew Doors with the ECAM Display Unit (DU)
F Proximity Switches (13WV1,13WV2)
FOR [13WV2] (PROX SW-HANDLE, R FWD PAX/CREW DOOR)
TASK 25-23-46-400-001-A
Installation of the Door Linings on the Forward Passenger/Crew Doors
FOR [15WV1] (PROX SW-HOOK, L AFT PAX/CREW DOOR)
TASK 25-23-45-400-008-A
Installation of the Door Frame Linings on the Left Aft Passenger/Crew Door
FOR [15WV2] (PROX SW-HOOK, R AFT PAX/CREW DOOR)
TASK 25-23-45-400-005-A
Installation of the Door Frame Linings on the Right Aft Passenger/Crew Door
FOR [17WV1] (PROX SW-HANDLE, L AFT PAX/CREW DOOR)
TASK 25-23-46-400-002-A
Installation of the Door Linings on the Aft Passenger/Crew Doors
FOR [17WV1] (PROX SW-HANDLE, L AFT PAX/CREW DOOR)
FOR [17WV2] (PROX SW-HANDLE, R AFT PAX/CREW DOOR)
TASK 52-71-00-820-002-A
Adjustment of the Proximity Switches of the Passenger/Crew Doors with the Doors Checking Tool
TASK 52-71-00-820-002-A-01
Adjustment of the Proximity Switches of the Passenger/Crew Doors with the ECAM Display Unit (DU)
F Proximity Switches (17WV1,17WV2)
FOR [17WV2] (PROX SW-HANDLE, R AFT PAX/CREW DOOR)
TASK 25-23-46-400-002-A
Installation of the Door Linings on the Aft Passenger/Crew Doors
3. Job Set-up
Subtask 52-71-11-860-050-A
A. Aircraft Maintenance Configuration
   (1) Make sure that the ground service network is energized
(Ref. AMM TASK 24-42-00-861-001).
   (2) Make sure that the safety precautions are obeyed (Ref. AMM TASK 52-10-00-860-001).
   (3) Make sure that the access platform is in position.
Subtask 52-71-11-865-057-A
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
121VUEIS/SLIDES/ARM AND WARN/FLT15WNP11
121VUEIS/SLIDES/ARM AND WARN/GND13WNP10
121VUEIS/SDAC1 AND 2/DOOR/DET/PAX48WVP05
4. Procedure
Subtask 52-71-11-420-051-A
A. Installation of the Proximity Switches
   (1) FOR [11WV1] (PROX SW-HOOK, L FWD PAX/CREW DOOR), [11WV2] (PROX SW-HOOK, R FWD PAX/CREW DOOR), [15WV1] (PROX SW-HOOK, L AFT PAX/CREW DOOR), [15WV2] (PROX SW-HOOK, R AFT PAX/CREW DOOR)
F Proximity Switches (11WV1,11WV2,15WV1,15WV2)
     (a) Install the proximity switch (2) on the support (6).
     (b) Install the washer (5) and the nut (4).
     (c) Tighten the nut. Safety with 14QDB1Wire-Locking Dia: 0.5 mm (0.020 inch) CRES Nickel Alloy -.
     (d) Remove the blanking cap from the electrical connector (1).
     (e) Connect the electrical connector (1) to the proximity switch (2).
     (f) Adjust of the proximity switch (2) (Ref. AMM TASK 52-71-00-820-001).
   (2) FOR [13WV1] (PROX SW-HANDLE, L FWD PAX/CREW DOOR), [13WV2] (PROX SW-HANDLE, R FWD PAX/CREW DOOR)
F Proximity Switches (13WV1,13WV2)
     (a) Install the proximity switch (12) on the support (16).
     (b) Install the washer (15) and the nut (14).
     (c) Tighten the nut. Safety with 14QDB1Wire-Locking Dia: 0.5 mm (0.020 inch) CRES Nickel Alloy -.
     (d) Remove the blanking cap from the electrical connector (11).
     (e) Connect the electrical connector (11) to the proximity switch (12).
     (f) Adjust of the proximity switch (12) (Ref. AMM TASK 52-71-00-820-002).
   (3) FOR [17WV1] (PROX SW-HANDLE, L AFT PAX/CREW DOOR), [17WV2] (PROX SW-HANDLE, R AFT PAX/CREW DOOR)
F Proximity Switches (17WV1,17WV2)
     (a) Install the proximity switch (22) on the support (26).
     (b) Install the washer (25) and the nut (24).
     (c) Tighten the nut. Safety with 14QDB1Wire-Locking Dia: 0.5 mm (0.020 inch) CRES Nickel Alloy -.
     (d) Remove the blanking cap from the electrical connector (21).
     (e) Connect the electrical connector (21) to the proximity switch (22).
     (f) Adjust of the proximity switch (22) (Ref. AMM TASK 52-71-00-820-002).
Subtask 52-71-11-865-054-A
B. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
121VUEIS/SLIDES/ARM AND WARN/FLT15WNP11
121VUEIS/SLIDES/ARM AND WARN/GND13WNP10
121VUEIS/SDAC1 AND 2/DOOR/DET/PAX48WVP05
Subtask 52-71-11-710-050-A
C. Operational Test of the Warning System
   (1) Do an operational test of the warning system (Ref. AMM TASK 52-71-00-710-001).
5. Close-up
Subtask 52-71-11-420-053-A
A. Installation of the Lining Panel
   (1) Install the insulation blanket.
   (2) Install the applicable lining panel:
NOTE: You can refer to AMM chapter 06 for the lining details (Ref. AMM D/O 06-41-53-00).
     (a) FOR [11WV1] (PROX SW-HOOK, L FWD PAX/CREW DOOR)
(Ref. AMM TASK 25-23-45-400-006)
     (b) FOR [11WV2] (PROX SW-HOOK, R FWD PAX/CREW DOOR)
(Ref. AMM TASK 25-23-45-400-007)
     (c) FOR [13WV1] (PROX SW-HANDLE, L FWD PAX/CREW DOOR)
(Ref. AMM TASK 25-23-46-400-001)
     (d) FOR [13WV2] (PROX SW-HANDLE, R FWD PAX/CREW DOOR)
(Ref. AMM TASK 25-23-46-400-001)
     (e) FOR [15WV1] (PROX SW-HOOK, L AFT PAX/CREW DOOR)
(Ref. AMM TASK 25-23-45-400-008)
     (f) FOR [15WV2] (PROX SW-HOOK, R AFT PAX/CREW DOOR)
(Ref. AMM TASK 25-23-45-400-005)
     (g) FOR [17WV1] (PROX SW-HANDLE, L AFT PAX/CREW DOOR)
(Ref. AMM TASK 25-23-46-400-002)
     (h) FOR [17WV2] (PROX SW-HANDLE, R AFT PAX/CREW DOOR)
(Ref. AMM TASK 25-23-46-400-002).
Subtask 52-71-11-410-052-A
B. Close Access
   (1) Obey the special precautions after the work on the door (Ref. AMM TASK 52-10-00-860-002).
   (2) Remove all the ground support equipment, the maintenance equipment, the standard and special tools and all other items.
   (3) Make sure that the work area is clean and clear of tools and other items.
   (4) Close the applicable passenger/crew door 831 or 841 or 832 or 842 (Ref. AMM TASK 52-10-00-410-001).
   (5) Remove the access platform(s).
Subtask 52-71-11-862-050-A
C. De-energize the ground service network
(Ref. AMM TASK 24-42-00-862-001).
[Rev.10 from 2021] 2026.04.02 06:28:32 UTC
"WTRUIB" 2025