Removal of the Buzzer from the Cockpit Door Locking System (CDLS)
TASK 52-51-13-000-001-A
Removal of the Buzzer from the Cockpit Door Locking System (CDLS)
Self Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Referenced Information
3. Job Set-up
Subtask 52-51-13-860-051-A
Subtask 52-51-13-010-051-A
[Rev.10 from 2021]
2026.04.02 07:23:55 UTC
Removal of the Buzzer from the Cockpit Door Locking System (CDLS)
FIN: 23MQ
1. Reason for the JobSelf Explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| No specific | 1 | TIE WRAP(S) |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-42-00-861-001-A | Energize the Ground Service Network from the External Power |
| TASK 25-13-41-000-001-A | Removal of the Ceiling Panels |
| ESPM 205455 | |
Subtask 52-51-13-860-051-A
A. Aircraft Maintenance Configuration
(1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
Subtask 52-51-13-865-050-A (1) Energize the ground service network
(Ref. AMM TASK 24-42-00-861-001).
B. Open, safety and tag this(these) circuit breaker(s):
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H08 |
| ** ON A/C NOT FOR ALL | |||
| 49VU | LIGHTING/EMER LT/CKPT/DOME | 1LE | H06 |
| ** ON A/C NOT FOR ALL | |||
| 122VU | DOORS/PAX/MONG | 1MQ | T13 |
| ** ON A/C ALL | |||
| 122VU | LIGHTING/CKPT/DOME | 3LE | Y06 |
| ** ON A/C NOT FOR ALL | |||
| 122VU | DOORS CKPT LOCK | 1MQ | T13 |
| 122VU | COCKPIT DOOR LOCK SYSTEM | 1MQ | T13 |
Subtask 52-51-13-010-051-A
A. Removal of the Ceiling Panel
(1) Remove ceiling panel 211HC (5) (Ref. AMM TASK 25-13-41-000-001).
Subtask 52-51-13-020-050-A (1) Remove ceiling panel 211HC (5) (Ref. AMM TASK 25-13-41-000-001).
B. Removal of the Buzzer
(1) Disconnect the cable terminals (1) and (2).
(2) Loosen the knurled nut (4) with your hand.
(3) Remove the buzzer (3).
(4) Safety the disconnected electrical wires ESPM 205455.
(5) Temporarily attach the disconnected electrical wires to the structure with the TIE WRAP(S).
(1) Disconnect the cable terminals (1) and (2).
(2) Loosen the knurled nut (4) with your hand.
(3) Remove the buzzer (3).
(4) Safety the disconnected electrical wires ESPM 205455.
(5) Temporarily attach the disconnected electrical wires to the structure with the TIE WRAP(S).
Buzzer of the CDLS