Installation of the Access Panel (134AR,154AR)

TASK 52-42-15-400-001-A
Installation of the Access Panel (134AR,154AR)

ZONE: 130
ZONE: 150

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
130	FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX
150	AFT CARGO COMPARTMENT FWD PRESS BULKHEAD TO AFT BULKHEAD OF AFT CARGO COMPARTMENT
134AR, 154AR

B. Referenced Information

REFERENCE	DESIGNATION
Control Panel of Forward/Aft Cargo-Compartment Door 134AR/154AR

3. Job Set-up
Subtask 52-42-15-420-050-A

A. Installation of the Access Panel (134AR,154AR)
(1) Install the spring rod assembly (15) on the stop fitting (1) as follows:
(a) If removed, install the compression spring (5) and the guide (4) on the the spring bolt (6).
(b) Put the spring rod assembly (15) in position to the stop fitting (1) and install the pin (2).
(c) Safety the pin (2) with the retaining ring (3).
(2) Install the access panel (14) as follows:
(a) Put the hinges (10) and (13) in position on the support fittings (11) and install the bolts (12).
(b) Safety the bolts (12) with the retaining rings (9).
(3) Connect the spring rod assembly (15) to the hinge (10) as follows:
(a) Put the spring rod assembly (15) in position on the hinge (10) and install the bolt (7).
(b) Safety the bolt (7) with the retaining ring (8).

4. Procedure
Subtask 52-42-15-410-050-A

A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Close the access panel 134AR and/or 154AR.

[Rev.10 from 2021] 2026.04.02 06:28:18 UTC