Removal of the Avionics-Compartment Lateral-Right Door
TASK 52-41-13-000-001-A
Removal of the Avionics-Compartment Lateral-Right Door
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 52-41-13-865-050-A
Subtask 52-41-13-020-050-A
[Rev.10 from 2021]
2026.04.02 06:28:14 UTC
Removal of the Avionics-Compartment Lateral-Right Door
CAUTION:
THIS PART IS A REMOVABLE STRUCTURAL COMPONENT (RSC), WHICH CAN BE MOVED BETWEEN AIRCRAFT. THUS IT CAN HAVE DIFFERENT OPERATION CONDITIONS AND A DIFFERENT LIFE RECORD (FLIGHT HOURS/FLIGHT CYCLES/CALENDAR) FROM THE AIRCRAFT IT IS INSTALLED ON OR REMOVED FROM. THE OPERATOR IS RESPONSIBLE FOR THE SPECIFIC TRACKING AND CONTINUED AIRWORTHINESS OF REMOVABLE STRUCTURAL COMPONENTS. INCORRECT MAINTENANCE OF THESE COMPONENTS CAN CAUSE A RISK FOR THE FLIGHT SAFETY.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE |
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 822 |
| REFERENCE | DESIGNATION |
|---|---|
Subtask 52-41-13-865-050-A
A. Open, safety and tag this(these) circuit breaker(s):
Subtask 52-41-13-010-050-A | PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 121VU | EIS/SDAC1 AND 2/DOOR/DET/AVNCS | 46WV | P02 |
B. Get Access
(1) Put an ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone 126.
(2) Open the door 822.
4. Procedure(1) Put an ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone 126.
(2) Open the door 822.
Subtask 52-41-13-020-050-A
A. Removal of Avionics-Compartment Lateral-Right Door
(1) Disconnect the bonding leads (9).
(2) Remove and discard the cotter pins (2).
(3) Remove the nuts (3), then the washer (8).
(4) Hold the lateral-right avionics-compartment door (1).
(5) Remove the pins (6) then the bushes (7), (5) and (4).
(6) Remove the lateral-right avionics-compartment door (1).
(7) Remove the bushes (7), (4) and (5).
(1) Disconnect the bonding leads (9).
(2) Remove and discard the cotter pins (2).
(3) Remove the nuts (3), then the washer (8).
(4) Hold the lateral-right avionics-compartment door (1).
(5) Remove the pins (6) then the bushes (7), (5) and (4).
(6) Remove the lateral-right avionics-compartment door (1).
(7) Remove the bushes (7), (4) and (5).
Avionics-Compartment Lateral-Right Door