W DOC AIRBUS | AMM A320F

Removal of the Lateral Left Avionics-Compartment-Door


TASK 52-41-12-000-001-A
Removal of the Lateral Left Avionics-Compartment-Door


WARNING: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT A SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR CAUSE YOU INJURY.
CAUTION: THIS PART IS A REMOVABLE STRUCTURAL COMPONENT (RSC), WHICH CAN BE MOVED BETWEEN AIRCRAFT. THUS IT CAN HAVE DIFFERENT OPERATION CONDITIONS AND A DIFFERENT LIFE RECORD (FLIGHT HOURS/FLIGHT CYCLES/CALENDAR) FROM THE AIRCRAFT IT IS INSTALLED ON OR REMOVED FROM. THE OPERATOR IS RESPONSIBLE FOR THE SPECIFIC TRACKING AND CONTINUED AIRWORTHINESS OF REMOVABLE STRUCTURAL COMPONENTS. INCORRECT MAINTENANCE OF THESE COMPONENTS CAN CAUSE A RISK FOR THE FLIGHT SAFETY.
ZONE: 125
1. Reason for the Job
Self explanatory
2. Job Set-up Information
 A. Fixtures, Tools, Test and Support Equipment
REFERENCE
QTY
DESIGNATION
No specific
AR
ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE
No specific
AR
SAFETY CLIP - CIRCUIT BREAKER
 B. Work Zones and Access Panels
ZONE/ACCESS
ZONE DESCRIPTION
125
LATERAL AVIONIC COMPARTMENT
812
 C. Referenced Information
REFERENCE
DESIGNATION
3. Job Set-up
Subtask 52-41-12-865-050-A
A. Open, safety and tag this(these) circuit breaker(s):
PANELDESIGNATIONFINLOCATION
** ON A/C ALL
121VUEIS/SDAC1 AND 2/DOOR/DET/AVNCS46WVP02
Subtask 52-41-12-010-050-A
B. Get Access
   (1) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position at zone 125.
   (2) Open door 812.
4. Procedure
Subtask 52-41-12-020-050-A ** ON A/C NOT FOR ALL
A. Removal of the Lateral Left Avionics-Compartment-Door
   (1) Remove the screws (8), the washers (7) and the bonding leads (6).
   (2) Remove and discard the cotter pins (2).
   (3) Hold the door (1) and remove the nuts (3), the washers (4) and the bolts (10).
   (4) Remove the door (1).
   (5) Remove the bushes (5), (9) and (11).
Subtask 52-41-12-020-050-B ** ON A/C NOT FOR ALL
A. Removal of the Lateral Left Avionics-Compartment-Door
   (1) Remove the screws (9), the washers (8) and the bonding leads (7).
   (2) Remove and discard the cotter pins (2).
   (3) Remove the nuts (3).
   (4) If the washers (4) are installed, remove them.
   (5) Hold the door (1) and remove the washers (5) and the bolts (11).
   (6) Remove the door (1).
   (7) Remove the bushes (6), (10) and (12).
[Rev.10 from 2021] 2026.04.02 07:23:41 UTC