Removal of the Seal of the Forward Avionics-Compartment Door

TASK 52-41-11-000-003-A
Removal of the Seal of the Forward Avionics-Compartment Door

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU START A TASK ON OR NEAR:

THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.

MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

WARNING: MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING GEAR. THIS WILL PREVENT UNWANTED MOVEMENT OF THE LANDING GEAR, AND THUS POSSIBLE INJURY TO PERSONS AND DAMAGE TO THE AIRCRAFT AND/OR EQUIPMENT.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
811

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-41-11-000-001-A	Removal of the Avionics-Compartment Forward Door
Seal of the Forward Avionics-Compartment Door

3. Job Set-up
Subtask 52-41-11-010-055-A

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position at zone 120.
(2) Remove the forward avionics-compartment door 811 (Ref. AMM TASK 52-41-11-000-001).

4. Procedure
Subtask 52-41-11-020-053-A

A. Removal of the Seal

Seal of the Forward Avionics-Compartment Door

(1) Remove the 24 screws (4), and the 24 washers (5).
(2) Remove the seal-retainers (3).

NOTE: Make match marks to show the position of each seal-retainer and to make the installation easier.

(3) Remove the seal (2) from the door (1).

[Rev.10 from 2021] 2026.04.02 07:23:41 UTC