Detailed Inspection of the Door Seals.

TASK 52-41-00-210-001-A
Detailed Inspection of the Door Seals.

ZONE: 811
ZONE: 812
ZONE: 822
ZONE: 824

1. Reason for the Job
Refer to the MPD TASK: 524100-01
DETAILED INSPECTION OF DOOR SEALS
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT)
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
811	FORWARD AVIONICS COMPARTMENT DOOR
812	LATERAL AVIONICS COMPARTMENT DOOR (LEFT)
822	LATERAL AVIONICS COMPT DOOR (RIGHT)
824	REAR AVIONIC COMPARTMENT DOOR (RIGHT)
811, 812, 822, 824

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-41-00-010-002-A	Open the Avionics Compartment Doors for Access
TASK 52-41-00-410-002-A	Close the Avionics Compartment Doors after Access

3. Job Set-up
Subtask 52-41-00-010-050-A

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) in position at zone 811, 812, 822 or 824.
(2) Open the applicable access door 811, 812, 822 or 824 (Ref. AMM TASK 52-41-00-010-002).

Subtask 52-41-00-865-050-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	EIS/SDAC1 AND 2/DOOR/DET/AVNCS	46WV	P02

4. Procedure
Subtask 52-41-00-220-050-A

A. Inspection
(1) Do a detailed inspection of the door seals.
(2) Make sure that there are no signs of chafing and breaks.

5. Close-up
Subtask 52-41-00-865-051-A

A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	EIS/SDAC1 AND 2/DOOR/DET/AVNCS	46WV	P02

Subtask 52-41-00-410-050-A

B. Close Access
(1) Close the applicable access door 811, 812, 822 or 824 (Ref. AMM TASK 52-41-00-410-002).
(2) Make sure that the work area is clean and clear of tools and other items.
(3) Remove the access platform(s).

[Rev.10 from 2021] 2026.04.02 06:28:13 UTC