DOC AIRBUS | AMM A320FDeactivation of the Access Door of the Blue Hydraulic System
TASK 52-41-00-040-001-A
Deactivation of the Access Door of the Blue Hydraulic System
CDL 52-21
Blue Hydraulic Access Door 197 FB
(Old CDL reference: 52-17)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Consumable Materials
C. Work Zones and Access Panels
D. Referenced Information
3. Job Set-up
Subtask 52-41-00-941-051-A
Subtask 52-41-00-040-050-A
Subtask 52-41-00-860-058-A
[Rev.10 from 2021]
2026.04.02 06:28:13 UTC
Deactivation of the Access Door of the Blue Hydraulic System
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
1. Reason for the JobCDL 52-21
Blue Hydraulic Access Door 197 FB
(Old CDL reference: 52-17)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 2M (6 FT) |
| REFERENCE | DESIGNATION |
|---|---|
| (Material No.05RAB9) | Adhesive Film Tape-- Aluminium Foil - |
| (Material No.05RAC1) | Adhesive Film Tape-- Aluminium Foil - Sound damping - |
| (Material No.08BAA9) | Non Aqueous Cleaner-General - - |
| (Material No.14SBA1) | Textile-Lint free Cotton - |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 190 | BELLY FAIR, AIR CONDITIONING & HYD COMPT |
| 197FB |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 52-41-24-000-001-A | Removal of the Access Door (197FB) of the Blue Hydraulic System |
Access Door of the Blue Hydraulic SystemSubtask 52-41-00-941-051-A
A. Preparation for the Deactivation
(1) Put the ACCESS PLATFORM 2M (6 FT) in position below damaged access door 197FB.
4. Procedure(1) Put the ACCESS PLATFORM 2M (6 FT) in position below damaged access door 197FB.
Subtask 52-41-00-040-050-A
A. Deactivation of the Access Door
(1) Remove the remaining part of damaged access door 197FB (Ref. AMM TASK 52-41-24-000-001).
(2) Temporarily attach the remaining support link to the adjacent belly fairing structure.
(3) Make sure that the work area is clean and clear of tools and other items.
(a) Use the Textile-Lint free Cotton - (Material No.14SBA1) with Non Aqueous Cleaner-General - - (Material No.08BAA9) to clean the belly fairing panel around the cutout.
(4) Apply three layers of high-speed tape Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) to the cutout of the belly fairing panel as follows:
(b) Apply the second layer diagonally on the first layer and make sure that there is an overlap of each tape strip.
(c) Apply the third layer diagonally opposite to the second layer and make sure that there is an overlap of each tape strip.
(d) Make sure that the adhesive tape has a minimum overlap of 25.4 mm (1.0 in.) around the cutout of the belly fairing panel.
(5) Do an inspection of the high-speed tape at each three days:
(a) If you find damage, refer to step (4) to replace the high-speed tape.
5. Close-up(1) Remove the remaining part of damaged access door 197FB (Ref. AMM TASK 52-41-24-000-001).
(2) Temporarily attach the remaining support link to the adjacent belly fairing structure.
(3) Make sure that the work area is clean and clear of tools and other items.
(a) Use the Textile-Lint free Cotton - (Material No.14SBA1) with Non Aqueous Cleaner-General - - (Material No.08BAA9) to clean the belly fairing panel around the cutout.
(4) Apply three layers of high-speed tape Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) to the cutout of the belly fairing panel as follows:
NOTE: It is acceptable to use tape Adhesive Film Tape-- Aluminium Foil - Sound damping - (Material No.05RAC1) as an alternative of the high-speed tape Adhesive Film Tape-- Aluminium Foil - (Material No.05RAB9) .
(a) Apply the first layer longitudinally across the cutout of the belly fairing panel. (b) Apply the second layer diagonally on the first layer and make sure that there is an overlap of each tape strip.
(c) Apply the third layer diagonally opposite to the second layer and make sure that there is an overlap of each tape strip.
(d) Make sure that the adhesive tape has a minimum overlap of 25.4 mm (1.0 in.) around the cutout of the belly fairing panel.
(5) Do an inspection of the high-speed tape at each three days:
(a) If you find damage, refer to step (4) to replace the high-speed tape.
Subtask 52-41-00-860-058-A
A. Put the aircraft back to the serviceable condition.
(1) Remove the access platform(s).
(2) Make an entry in the logbook.
(1) Remove the access platform(s).
(2) Make an entry in the logbook.