Reactivation of the Hand Pump

TASK 52-36-00-440-002-A
Reactivation of the Hand Pump

1. Reason for the Job
MMEL 52-30-05A
CARGO DOOR HAND PUMP (FAA ONLY)
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
198CB, 198DB

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-36-11-000-001-A	Removal of the Hand Pump
TASK 52-36-11-400-001-A	Installation of the Hand Pump

3. Job Set-up
Subtask 52-36-00-860-059-A

A. Aircraft Maintenance Configuration
(1) Make sure that the ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE is in position below the Yellow ground service panel.
(2) Make sure that the access door 198CB is opened and the access panel 198DB is removed.

4. Procedure
Subtask 52-36-00-020-051-A

A. Remove the defective hand pump (Ref. AMM TASK 52-36-11-000-001).

Subtask 52-36-00-420-051-A

B. Install the replacement hand pump (Ref. AMM TASK 52-36-11-400-001).

[Rev.10 from 2021] 2026.04.02 06:28:10 UTC