DOC AIRBUS | AMM A320FRemoval of the Indicator Light
TASK 52-35-12-000-001-A
Removal of the Indicator Light
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 52-35-12-865-050-A
Subtask 52-35-12-020-050-B ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:28:09 UTC
Removal of the Indicator Light
1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | AR | SAFETY CLIP - CIRCUIT BREAKER |
| 98F52308330000 | 1 | SPANNER-WRENCH |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 130 | FWD CARGO COMPT AFT BULKHEAD OF AVNCS COMPT TO FWD PRESSURE BULKHEAD OF WING CENTER BOX |
| 134AR |
| REFERENCE | DESIGNATION |
|---|---|
| ESPM 204511 | |
| ESPM 204512 | |
Indicator Light 9MJSubtask 52-35-12-865-050-A
A. Open, safety and tag this(these) circuit breaker(s):
Subtask 52-35-12-010-050-A 4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 122VU | DOORS/CARGO | 1MJ | T12 |
Subtask 52-35-12-020-050-B ** ON A/C NOT FOR ALL
A. Removal of the Indicator Light 9MJ
(1) Remove the lamp (3) from the lamp body (4) as follows:
(a) Turn the lamp cover (1) and remove it together with the rubber cap (2) from the lamp body (4).
(b) Remove and discard the lamp (3) from the lamp body (4).
(2) Remove the lamp body (4) from the mounting bracket (6) as follows:
(a) Remove the castle nut (5) from the lamp body (4) with the 98F52308330000 SPANNER-WRENCH
(b) Remove the lamp body (4) together with the tab washer (7) and the castle nut (8) from the mounting bracket (6).
(c) Make a mark on the wire harness (9) to identify the individual wire.
(d) Disconnect the wire harness (9) from the terminals of the lamp body (4) ESPM 204512.
Subtask 52-35-12-020-050-C ** ON A/C NOT FOR ALL (1) Remove the lamp (3) from the lamp body (4) as follows:
(a) Turn the lamp cover (1) and remove it together with the rubber cap (2) from the lamp body (4).
(b) Remove and discard the lamp (3) from the lamp body (4).
(2) Remove the lamp body (4) from the mounting bracket (6) as follows:
(a) Remove the castle nut (5) from the lamp body (4) with the 98F52308330000 SPANNER-WRENCH
(b) Remove the lamp body (4) together with the tab washer (7) and the castle nut (8) from the mounting bracket (6).
(c) Make a mark on the wire harness (9) to identify the individual wire.
(d) Disconnect the wire harness (9) from the terminals of the lamp body (4) ESPM 204512.
A. Removal of the Indicator Light 9MJ
(1) Bend the lock washer (6) to release the nut (5).
(2) Remove the nut (5) and the lock washer (6) from the lamp body (2).
(3) Remove the lamp body (2) with the key washer (3) from the mounting bracket (4).
(4) Make a mark on the wire harness (1) to identify the different wires.
(5) Disconnect the wire harness (1) from the terminals of the lamp body (2) ESPM 204511.
(1) Bend the lock washer (6) to release the nut (5).
(2) Remove the nut (5) and the lock washer (6) from the lamp body (2).
(3) Remove the lamp body (2) with the key washer (3) from the mounting bracket (4).
(4) Make a mark on the wire harness (1) to identify the different wires.
(5) Disconnect the wire harness (1) from the terminals of the lamp body (2) ESPM 204511.