Removal of the Latch and the Stop Fitting

TASK 52-33-31-000-001-A
Removal of the Latch and the Stop Fitting

CAUTION: IMMEDIATELY AFTER YOU OPEN THE CARGO COMPARTMENT DOOR, RECORD ON THE WORK CARD ON THE DOOR, THE DATE AND TIME WHEN YOU OPENED IT. IF THE CARGO COMPARTMENT DOOR STAYS OPEN FOR 12 HOURS OR MORE, YOU MUST BLEED THE HYDRAULIC SYSTEM RELATED TO IT. IF YOU DO NOT OBEY THESE PRECAUTIONS, THE DOOR CAN CLOSE SUDDENLY WHEN YOU SET THE DOOR TO "CLOSE". THIS CAN CAUSE DAMAGE TO THE DOOR AND TO THE AIRCRAFT STRUCTURE.

ZONE: 827

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
827	BULK CARGO COMPARTMENT DOOR

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
TASK 52-30-00-860-006-A	Open the Bulk Cargo-Compartment Door
TASK 52-33-13-000-001-A	Removal of the Lining and Insulation of the Bulk Cargo-Compartment Door
Latch and Stop Fitting

3. Job Set-up
Subtask 52-33-31-010-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the aft cargo-compartment door (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 3M (10 FT)- ADJUSTABLE in position below the bulk cargo-compartment door.
(3) Remove the lining and insulation of the bulk cargo-compartment door (Ref. AMM TASK 52-33-13-000-001).
(4) Open the bulk cargo-compartment door (Ref. AMM TASK 52-30-00-860-006).

4. Procedure
Subtask 52-33-31-020-050-B ** ON A/C NOT FOR ALL

A. Removal of the Stop Fitting
(1) Remove the nuts (2) and (3), the bolts (1) and (4) and disconnect the fitting assembly (7) from the bulk door structure.
(2) Remove the nut (8), the washer set (6) and the stop screw (5) from the fitting assembly (7).

[Rev.10 from 2021] 2026.04.02 06:28:07 UTC