Removal of the Lining and Insulation of the Bulk Cargo-Compartment Door

TASK 52-33-13-000-001-A
Removal of the Lining and Insulation of the Bulk Cargo-Compartment Door

CAUTION: IMMEDIATELY AFTER YOU OPEN THE CARGO COMPARTMENT DOOR, RECORD ON THE WORK CARD ON THE DOOR, THE DATE AND TIME WHEN YOU OPENED IT. IF THE CARGO COMPARTMENT DOOR STAYS OPEN FOR 12 HOURS OR MORE, YOU MUST BLEED THE HYDRAULIC SYSTEM RELATED TO IT. IF YOU DO NOT OBEY THESE PRECAUTIONS, THE DOOR CAN CLOSE SUDDENLY WHEN YOU SET THE DOOR TO "CLOSE". THIS CAN CAUSE DAMAGE TO THE DOOR AND TO THE AIRCRAFT STRUCTURE.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 2M (6 FT)

B. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Bulk Cargo Door Lining and Insulation

3. Job Set-up
Subtask 52-33-13-010-051-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Open the AFT cargo-compartment door (Ref. AMM TASK 52-30-00-860-001) to get access to the inner side of the closed Bulk cargo door.
(2) Put the ACCESS PLATFORM 2M (6 FT) in position at the AFT cargo-compartment door.
(3) Remove the divider net at FR59 to get access to the bulk cargo compartment.
(4) Remove the door net from the opening of the closed Bulk cargo door to get access to the linings.

4. Procedure
Subtask 52-33-13-020-050-D ** ON A/C NOT FOR ALL

A. Removal of the Linings and the Insulation Panels
(1) Carefully disengage the VELCRO tapes (4) and remove the linings (1), (2) and (3) from the inner skin of the bulk cargo door.
(2) Remove and discard the thick self-adhesive insulation-panels (5) from the applicable interspaces of the door structure.
(3) Remove and discard the thin self-adhesive insulation-panels (6) from the applicable interspaces of the door structure.

[Rev.10 from 2021] 2026.04.02 06:28:06 UTC