DOC AIRBUS | AMM A320FRemoval of the X-Stops
TASK 52-32-31-000-002-A
Removal of the X-Stops
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
B. Work Zones and Access Panels
C. Referenced Information
3. Job Set-up
Subtask 52-32-31-010-051-A
Subtask 52-32-31-020-051-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:28:04 UTC
Removal of the X-Stops
CAUTION:
IMMEDIATELY AFTER YOU OPEN THE CARGO COMPARTMENT DOOR, RECORD ON THE WORK CARD ON THE DOOR, THE DATE AND TIME WHEN YOU OPENED IT. IF THE CARGO COMPARTMENT DOOR STAYS OPEN FOR 12 HOURS OR MORE, YOU MUST BLEED THE HYDRAULIC SYSTEM RELATED TO IT. IF YOU DO NOT OBEY THESE PRECAUTIONS, THE DOOR CAN CLOSE SUDDENLY WHEN YOU SET THE DOOR TO "CLOSE". THIS CAN CAUSE DAMAGE TO THE DOOR AND TO THE AIRCRAFT STRUCTURE.
1. Reason for the JobSelf explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment
| REFERENCE | QTY | DESIGNATION |
|---|---|---|
| No specific | 1 | ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE |
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 826AR |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 52-30-00-860-001-A | Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump |
| TASK 52-32-13-000-001-A | Removal of the Lining and Insulation |
| TASK 52-32-14-000-801-A | Removal of the Aft Cargo-Compartment-Door Access-Panels |
| TASK 53-35-13-000-001-A | Removal of the Belly Fairing Access Panels |
X-StopsSubtask 52-32-31-010-051-A
A. Get Access
(1) Open the AFT cargo-compartment door (referred to as cargo door) and safety it with the actuator safety locks (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below the opened cargo door.
(3) Remove the access panel 826AR from the cargo door (Ref. AMM TASK 52-32-14-000-801).
(4) Remove the fairing from the outer skin of the cargo door (Ref. AMM TASK 53-35-13-000-001).
(5) Remove the necessary lining and insulation from the cargo door (Ref. AMM TASK 52-32-13-000-001).
Subtask 52-32-31-865-052-A (1) Open the AFT cargo-compartment door (referred to as cargo door) and safety it with the actuator safety locks (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below the opened cargo door.
(3) Remove the access panel 826AR from the cargo door (Ref. AMM TASK 52-32-14-000-801).
(4) Remove the fairing from the outer skin of the cargo door (Ref. AMM TASK 53-35-13-000-001).
(5) Remove the necessary lining and insulation from the cargo door (Ref. AMM TASK 52-32-13-000-001).
B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:
4. Procedure| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 122VU | DOORS/CARGO | 1MJ | T12 |
Subtask 52-32-31-020-051-A ** ON A/C NOT FOR ALL
A. Removal of the X-stops
(1) Remove the lateral screws (1) and (10).
(2) Remove the nuts (5) and (14), the washers (6) and (15) and the screws (3) and (12).
(3) Remove the X-stops (2) and (11) and the shims (4) and (13) from the cargo door.
Subtask 52-32-31-020-051-B ** ON A/C NOT FOR ALL (1) Remove the lateral screws (1) and (10).
(2) Remove the nuts (5) and (14), the washers (6) and (15) and the screws (3) and (12).
(3) Remove the X-stops (2) and (11) and the shims (4) and (13) from the cargo door.
A. Removal of the X-stops
(1) Remove the lateral screws (1) and (10).
(2) Remove the X-stops (2) and (11) and the shims (3) and (12) from the cargo door.
(1) Remove the lateral screws (1) and (10).
(2) Remove the X-stops (2) and (11) and the shims (3) and (12) from the cargo door.