Removal of the Stop Bolts

TASK 52-32-31-000-001-A
Removal of the Stop Bolts

CAUTION: IMMEDIATELY AFTER YOU OPEN THE CARGO COMPARTMENT DOOR, RECORD ON THE WORK CARD ON THE DOOR, THE DATE AND TIME WHEN YOU OPENED IT. IF THE CARGO COMPARTMENT DOOR STAYS OPEN FOR 12 HOURS OR MORE, YOU MUST BLEED THE HYDRAULIC SYSTEM RELATED TO IT. IF YOU DO NOT OBEY THESE PRECAUTIONS, THE DOOR CAN CLOSE SUDDENLY WHEN YOU SET THE DOOR TO "CLOSE". THIS CAN CAUSE DAMAGE TO THE DOOR AND TO THE AIRCRAFT STRUCTURE.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Stop Bolts

3. Job Set-up
Subtask 52-32-31-010-050-A

A. Get Access
(1) Open the AFT cargo-compartment door (referrd to as cargo door) and safety it with the actuator safety locks (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below the opened cargo door.

Subtask 52-32-31-865-050-A

B. Make sure that this(these) circuit breaker(s) is(are) open, safetied and tagged:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	DOORS/CARGO	1MJ	T12

4. Procedure
Subtask 52-32-31-020-050-A

A. Removal of the Stop Bolts

Stop Bolts

(1) Release the tab washers (3) which safety the nuts (2).
(2) Loosen the nuts (2) and remove them with the stop bolts (1) and the tab washers (3).
(3) Discard the tab washers (3).

[Rev.10 from 2021] 2026.04.02 07:23:16 UTC