Removal of the Lining and Insulation

TASK 52-32-13-000-001-A
Removal of the Lining and Insulation

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	1	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE
No specific	AR	SAFETY CLIP - CIRCUIT BREAKER

B. Referenced Information

REFERENCE	DESIGNATION
TASK 52-30-00-860-001-A	Open the FWD or Aft Cargo-Compartment Door with the Yellow Electric Pump
Lining and Insulation of the Aft Cargo-Compartment Door ** ON A/C NOT FOR ALL
Lining and Insulation of the Aft Cargo-Compartment Door ** ON A/C NOT FOR ALL
Lining and Insulation of the Aft Cargo-Compartment Door ** ON A/C NOT FOR ALL
Lining and Insulation of the Aft Cargo-Compartment Door ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 52-32-13-010-050-A

A. Get Access
(1) Open the Aft cargo-compartment door (referred to as cargo door) and install the actuator safety locks (Ref. AMM TASK 52-30-00-860-001).
(2) Put the ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position below the opened cargo door.

Subtask 52-32-13-865-050-A

B. Open, safety and tag this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	HYDRAULIC/HYD POWER/Y	3803GX	N30
** ON A/C NOT FOR ALL
121VU	HYDRAULIC/HYD POWER/Y	3803GX	N31
** ON A/C ALL
122VU	DOORS/CARGO	1MJ	T12
123VU	Y HYD/ELEC/PUMP	3802GX	AB06
123VU	Y HYD/ELEC/ELEC PUMP/NORM	3801GX	AB03

4. Procedure
Subtask 52-32-13-020-050-E

A. Removal of the Protective Lining
(1) Release the quick-release fasteners (2) to disconnect the protective lining (3) from the cargo door (1).
(2) Carefully disengage the VELCRO tapes and remove the protective lining (3) together with the self-adhesive insulation from the cargo door (1).

[Rev.10 from 2021] 2026.04.02 06:46:10 UTC