Operational Check of Emergency Overwing Door Mechanisms
TASK 52-22-00-710-803-A
Operational Check of Emergency Overwing Door Mechanisms
1. Reason for the Job
Refer to the MPD TASK: 522101-01
OPERATIONAL CHECK OF EMERGENCY OVERWING DOOR MECHANISMS
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 52-22-00-860-109-A ** ON A/C NOT FOR ALL
Subtask 52-22-00-710-058-A ** ON A/C NOT FOR ALL
Subtask 52-22-00-410-072-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:27:38 UTC
Operational Check of Emergency Overwing Door Mechanisms
1. Reason for the Job
Refer to the MPD TASK: 522101-01
OPERATIONAL CHECK OF EMERGENCY OVERWING DOOR MECHANISMS
NOTE: This task is not applicable for the deactivated emergency overwing door.
2. Job Set-up InformationA. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 833 | EMERGENCY EXITS |
| 834 | EMERGENCY EXITS |
| 843 | EMERGENCY EXITS |
| 844 | EMERGENCY EXITS |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 25-23-47-000-803-A | Removal of the Door Lining from the Overwing Emergency Exit |
| TASK 25-23-47-400-803-A | Installation of the Door Lining on the Overwing Emergency Exit |
| TASK 25-62-00-081-001-A | Special Precautions after Work on the Offwing Escape-Slide Systems |
| TASK 25-62-00-481-001-A | Special Precautions before Work on the Offwing Escape-Slide Systems |
| TASK 52-22-00-010-802-A | Opening of the Overwing Emergency-Exit Door from the Passenger Compartment |
| TASK 52-22-00-010-803-A | Opening of the Overwing Emergency-Exit Door from the Outside |
| TASK 52-22-00-410-802-A | Closing of the Overwing Emergency-Exit Door from the Passenger Compartment |
Subtask 52-22-00-860-109-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Do the special precaution before work on the offwing escape-slide systems:
Subtask 52-22-00-010-084-A ** ON A/C NOT FOR ALL (1) Do the special precaution before work on the offwing escape-slide systems:
WARNING:
MAKE SURE THAT THE LOCK PIN IS CORRECTLY INSTALLED IN THE REGULATOR VALVE ASSEMBLY OF THE INFLATION RESERVOIR. THIS SAFETIES ALL COMPONENTS OF THE INFLATION SYSTEM IN OPERATION AND PREVENTS ACCIDENTAL:
(a) Do the special precaution before work on the offwing escape-slide systems (Ref. AMM TASK 25-62-00-481-001). - DISCHARGE OF THE INFLATION RESERVOIR
- DEPLOYMENT OF THE ESCAPE SLIDE
B. Get Access
(1) Remove the door lining of the emergency overwing door (Ref. AMM TASK 25-23-47-000-803).
4. Procedure(1) Remove the door lining of the emergency overwing door (Ref. AMM TASK 25-23-47-000-803).
Subtask 52-22-00-710-058-A ** ON A/C NOT FOR ALL
A. Operational Check of the Emergency Overwing Door-Mechanisms
(1) From the cabin side:
(a) Unlock and lift the emergency overwing door with the inner handle (2) (Ref. AMM TASK 52-22-00-010-802).
(b) Make sure that these mechanisms operate correctly:
(d) Lower and lock the the emergency overwing door with the inner handle (2) (Ref. AMM TASK 52-22-00-410-802).
(e) Make sure that these mechanisms operate correctly:
(a) Unlock and lift the emergency overwing door with the outer handle (Ref. AMM TASK 52-22-00-010-803).
(b) Make sure that these mechanisms operate correctly:
(d) Do a visual check to make sure that the applicable emergency overwing door is correctly closed:
1 On the visual lock indicator (21), make sure that the black arrows (23) are aligned with the black lines (22) from the green segment.
5. Close-up(1) From the cabin side:
(a) Unlock and lift the emergency overwing door with the inner handle (2) (Ref. AMM TASK 52-22-00-010-802).
(b) Make sure that these mechanisms operate correctly:
- Unlocking mechanism
- Unlatching mechanism
- Lifting mechanism.
(d) Lower and lock the the emergency overwing door with the inner handle (2) (Ref. AMM TASK 52-22-00-410-802).
(e) Make sure that these mechanisms operate correctly:
- Locking mechanism
- Latching mechanism.
(a) Unlock and lift the emergency overwing door with the outer handle (Ref. AMM TASK 52-22-00-010-803).
(b) Make sure that these mechanisms operate correctly:
- Unlocking mechanism
- Unlatching mechanism
- Lifting mechanism.
(d) Do a visual check to make sure that the applicable emergency overwing door is correctly closed:
1 On the visual lock indicator (21), make sure that the black arrows (23) are aligned with the black lines (22) from the green segment.
Subtask 52-22-00-410-072-A ** ON A/C NOT FOR ALL
A. Close Access
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the door lining of the emergency overwing door (Ref. AMM TASK 25-23-47-400-803).
(3) Do the special precautions after you did work on the offwing escape-slide systems (Ref. AMM TASK 25-62-00-081-001).
(1) Make sure that the work area is clean and clear of tools and other items.
(2) Install the door lining of the emergency overwing door (Ref. AMM TASK 25-23-47-400-803).
(3) Do the special precautions after you did work on the offwing escape-slide systems (Ref. AMM TASK 25-62-00-081-001).
Locking Mechanism