Check Emergency Cylinder/Accumulator Pressure on Pressure Gauge
TASK 52-22-00-200-001-A
Check Emergency Cylinder/Accumulator Pressure on Pressure Gauge
Refer to the MPD TASK: 522200-08
CHECK EMERGENCY CYLINDER/ACCUMULATOR PRESSURE ON PRESSURE GAUGE.
A. Work Zones and Access Panels
B. Referenced Information
3. Job Set-up
Subtask 52-22-00-860-090-A ** ON A/C NOT FOR ALL
Subtask 52-22-00-210-052-A ** ON A/C NOT FOR ALL
Subtask 52-22-00-860-091-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.04.02 06:27:39 UTC
Check Emergency Cylinder/Accumulator Pressure on Pressure Gauge
ZONE: 833
ZONE: 834
ZONE: 835
ZONE: 843
ZONE: 844
ZONE: 845
FIN: 1600WM ** ON A/C NOT FOR ALL
FIN: 1601WM ** ON A/C NOT FOR ALL
FIN: 1602WM ** ON A/C NOT FOR ALL
FIN: 1603WM ** ON A/C NOT FOR ALL
1. Reason for the JobZONE: 834
ZONE: 835
ZONE: 843
ZONE: 844
ZONE: 845
FIN: 1600WM ** ON A/C NOT FOR ALL
FIN: 1601WM ** ON A/C NOT FOR ALL
FIN: 1602WM ** ON A/C NOT FOR ALL
FIN: 1603WM ** ON A/C NOT FOR ALL
Refer to the MPD TASK: 522200-08
CHECK EMERGENCY CYLINDER/ACCUMULATOR PRESSURE ON PRESSURE GAUGE.
NOTE: This task is only applicable on aircraft when:
- The door damper and the emergency operation cylinder are not connected to the Cabin Intercommunication Data System (CIDS).
2. Job Set-up Information- The door damper and the emergency operation cylinder are not connected to the Cabin Intercommunication Data System (CIDS).
A. Work Zones and Access Panels
| ZONE/ACCESS | ZONE DESCRIPTION |
|---|---|
| 833 | EMERGENCY EXITS |
| 834 | EMERGENCY EXITS |
| 835 | MID PASSENGER/CREW DOOR |
| 843 | EMERGENCY EXITS |
| 844 | EMERGENCY EXITS |
| 845 | MID PASSENGER/CREW DOOR |
| 835, 845 | |
| 833, 834, 843, 844 |
| REFERENCE | DESIGNATION |
|---|---|
| TASK 24-41-00-861-002-A | Energize the Aircraft Electrical Circuits from the External Power |
| TASK 24-41-00-861-002-A-01 | Energize the Aircraft Electrical Circuits from the APU |
| TASK 24-41-00-861-002-A-02 | Energize the Aircraft Electrical Circuits from Engine 1(2) |
| TASK 24-41-00-862-002-A | De-energize the Aircraft Electrical Circuits Supplied from the External Power |
| TASK 24-41-00-862-002-A-01 | De-energize the Aircraft Electrical Circuits Supplied from the APU |
| TASK 24-41-00-862-002-A-02 | De-energize the Aircraft Electrical Circuits Supplied from the Engine 1(2) |
| TASK 52-22-00-010-001-A | Opening of the Emergency Exit Doors from the Passenger Compartment |
| TASK 52-22-00-410-001-A | Closing of the Emergency Exit Doors from the Passenger Compartment |
| TASK 52-22-00-614-002-A | Charging of the Door Damper and Emergency Operation Cylinders at the Emergency Exit Doors |
Subtask 52-22-00-860-090-A ** ON A/C NOT FOR ALL
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the emergency exit door 833, 834, 843 or 844 is sufficiently open to get access to the applicable door damper (Ref. AMM TASK 52-22-00-010-001).
Subtask 52-22-00-860-090-CS ** ON A/C NOT FOR ALL (1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the emergency exit door 833, 834, 843 or 844 is sufficiently open to get access to the applicable door damper (Ref. AMM TASK 52-22-00-010-001).
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the emergency exit door 835 or 845 is sufficiently open to get access to the applicable door damper (Ref. AMM TASK 52-22-00-010-001).
4. Procedure(1) Energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-861-002).
(2) Make sure that the emergency exit door 835 or 845 is sufficiently open to get access to the applicable door damper (Ref. AMM TASK 52-22-00-010-001).
Subtask 52-22-00-210-052-A ** ON A/C NOT FOR ALL
A. Check of the Emergency Cylinder/Accumulator Pressure on the Pressure Gauge
Check of the Emergency Cylinder/Accumulator Pressure on the Pressure Gauge ** ON A/C NOT FOR ALL
Check of the Emergency Cylinder/Accumulator Pressure on the Pressure Gauge ** ON A/C NOT FOR ALL
(1) Look on the pressure gauge of the applicable door damper. Make sure that the pressure gauge needle is in the green area of the scale.
(2) If the pressure is not in the given limits, pressurize the accumulator of the door damper (Ref. AMM TASK 52-22-00-614-002).
5. Close-up
Check of the Emergency Cylinder/Accumulator Pressure on the Pressure Gauge ** ON A/C NOT FOR ALL
Check of the Emergency Cylinder/Accumulator Pressure on the Pressure Gauge ** ON A/C NOT FOR ALL (2) If the pressure is not in the given limits, pressurize the accumulator of the door damper (Ref. AMM TASK 52-22-00-614-002).
Subtask 52-22-00-860-091-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to the serviceable condition.
(1) Make sure that the emergency exit door 833, 834, 843 or 844 is correctly closed and locked (Ref. AMM TASK 52-22-00-410-001).
(2) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).
Subtask 52-22-00-860-091-CS ** ON A/C NOT FOR ALL (1) Make sure that the emergency exit door 833, 834, 843 or 844 is correctly closed and locked (Ref. AMM TASK 52-22-00-410-001).
(2) De-energize the aircraft electrical circuits
(Ref. AMM TASK 24-41-00-862-002).
A. Put the aircraft back to the serviceable condition.
(1) Make sure that the emergency exit door 835 or 845 is correctly closed and locked (Ref. AMM TASK 52-22-00-410-001).
(2) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).
(1) Make sure that the emergency exit door 835 or 845 is correctly closed and locked (Ref. AMM TASK 52-22-00-410-001).
(2) De-energize the aircraft electrical circuits (Ref. AMM TASK 24-41-00-862-002).