Removal of the Slide Release Mechanism

TASK 52-21-11-000-003-A
Removal of the Slide Release Mechanism

1. Reason for the Job
To replace a damaged component of the slide release mechanism or to change its installation position.

NOTE: This change makes it possible to install an emergency exit hatch to the opposite or the adjacent position.

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 25-23-47-000-001-A	Removal of the Lining from the Emergency Exit Hatches
TASK 52-21-11-000-001-A	Removal of the Emergency Exit Hatch
Slide Release Mechanism ** ON A/C NOT FOR ALL
Slide Release Mechanism ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 52-21-11-010-054-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Remove the emergency exit hatch (referred to as hatch) (Ref. AMM TASK 52-21-11-000-001).
(2) If necessary, remove the lining from the applicable hatch (Ref. AMM TASK 25-23-47-000-001).

4. Procedure
Subtask 52-21-11-020-051-A ** ON A/C NOT FOR ALL

A. Removal of the Slide Release Mechanism

Slide Release Mechanism ** ON A/C NOT FOR ALL

(1) Remove the nuts (24) and the bolts (23) from the edge curve of the hatch structure.
(2) Remove the slide release mechanism (25) from the hatch structure.
(3) If necessary, remove and discard the spring pin (26) from the guide fitting (22).
(4) Remove the latch pin (20) and the spring (21) from the guide fitting (22).

[Rev.10 from 2021] 2026.04.02 06:27:34 UTC